Finished my P34

Area to upload images, movies, etc. of simulated F1 cars, i.e. models

Topic author
Dustbin74
F2 Champion
F2 Champion
Posts: 104
Joined: Tue Nov 01, 2005 6:22 pm
Location: Toronto, Canada
Status: Offline

Post by Dustbin74 »

Thanks for the feedback guys! As for Ronnie's legs, the missus had pointed that out as well. I tried a dry fit, but found that the lower leg would have been way out proportion so I built him as is. Next time I'll have to chop the Tamiya's figure's legs at the hips, unless El Oso has something in this vintage I'm not aware about. (BTW Garymc, the driver came with the kit)

As for the Future, I just used a soft brush. The key I found was light coats - too have and you'll get opaque pools and drips.

Now onto the next project, an couple of F189's. Just pick-up an airbrush so I'll be learning to brush on those.....
Later,
Dustbin

Guest
Status: Offline

Post by Guest »

I dig it. I really want to build one of these but I'm having a hard time finding one at a reasonable price.
Post Reply