Box Stock F310B updated 3/17, rear suspension.........
-
Topic author - F2 Champion
- Posts: 130
- Joined: Sun Dec 03, 2006 11:29 am
- Location: Out in the sticks of Eagar,AZ
- Status: Offline
Re: Box Stock F310B updated 2/8
More Carbon Fiber decal finished. I still need to do the bottom of the 2 upper airfoils on the front wing. Should have that done tomorrow or the next day. After this I will do up the spill plates for the front wing and then it's ready for Urethane clear. This carbon fiber work is tedious lol. I had forgotten how much work it really was.
Paul
Paul
Re: Box Stock F310B updated 2/10, more carbon fiber
Really nice work so far!
-
Topic author - F2 Champion
- Posts: 130
- Joined: Sun Dec 03, 2006 11:29 am
- Location: Out in the sticks of Eagar,AZ
- Status: Offline
Re: Box Stock F310B updated 2/10, more carbon fiber
Finally after much sanding and filling the monocoque is painted. Couple coats of flat white and so far one coat of bright red. Putting on a second coat this morning and then let it sit ready for decaling. Gotta get the correct M@rlb0r0$ for it as the Tabu set I do have is wrong and don't have all the decals.
Also got the front spill plates done and decaled. Just needing clear.
Paul
Also got the front spill plates done and decaled. Just needing clear.
Paul
-
- FOTA Chairman
- Posts: 2409
- Joined: Sat Jan 26, 2002 5:27 pm
- Favorite F1 Team or Driver: Chapmans Lotus, James Hunt
- Location: Anza ca.
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
Looking good
-
- FOTA Chairman
- Posts: 4446
- Joined: Wed Dec 21, 2005 3:20 pm
- Favorite F1 Team or Driver: Stake Sauber
- Location: Oulu-Uleåborg Finland
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
Very good Paint & CF -Job .
My completed Models:
https://www.flickr.com/photos/150229040 ... 3349714787
https://www.flickr.com/photos/150229040 ... 3349714787
-
- F2 Champion
- Posts: 107
- Joined: Sun Dec 28, 2014 1:51 pm
- Favorite F1 Team or Driver: Gulf
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
Hi Paul, Like the progress !!!
Randy
Randy
-
- Major Constructor
- Posts: 1060
- Joined: Fri Mar 18, 2011 2:31 pm
- Location: New Hampshire - USA
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
It's coming along really nice.
Starr
Starr
Classic Plastic Model Club - Lowell, MA
-
- FOTA Chairman
- Posts: 4038
- Joined: Sun Apr 03, 2011 12:05 pm
- Location: Tokyo Japan
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
Paint job and wing part CF-ing look great!
Cheers, Chris
Cheers, Chris
-
Topic author - F2 Champion
- Posts: 130
- Joined: Sun Dec 03, 2006 11:29 am
- Location: Out in the sticks of Eagar,AZ
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
Thanks guys! I've got most of the decals on the monocoque but I am going to wait on the "other decals" before I clear it. I started fitting the rear panels and the lower tray is cleaned up and ready for detailing with cf decal. Going to get some more done before I break out the clear.
Paul
Paul
-
- FOTA Chairman
- Posts: 2271
- Joined: Sun Jul 30, 2006 4:27 pm
- Location: Barnsley, UK
- Status: Offline
Re: Box Stock F310B updated 2/16, Monocoque painted!
Very nice work so far, carbon decals on that airbox look great..!!
Steve Noble