3d build Honda RC213v from 2020
-
Topic author - FOTA Chairman
- Posts: 2253
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
3d build Honda RC213v from 2020
Hi,i just want to show you my current project.
It will be an Honda RC213v from something like 2020.
The files i got are a mix from the 2020 and 2021 bike.
I started with the rear end and created some more details to the parts.
The whole bike will be printed in 1/6 scale on my home printer. Its a personal project and my first MotoGP bike.
The File data was very basic so i started to separate the parts and made some improvements.
I made a rear damper and change the front and rear rims.
The brake disc was changed and the rear swing arm needed some welding lines and screws and some more stuff.
The changes i made so far are shown in silver color on the pics. Still a long way to go.
regards Christian
It will be an Honda RC213v from something like 2020.
The files i got are a mix from the 2020 and 2021 bike.
I started with the rear end and created some more details to the parts.
The whole bike will be printed in 1/6 scale on my home printer. Its a personal project and my first MotoGP bike.
The File data was very basic so i started to separate the parts and made some improvements.
I made a rear damper and change the front and rear rims.
The brake disc was changed and the rear swing arm needed some welding lines and screws and some more stuff.
The changes i made so far are shown in silver color on the pics. Still a long way to go.
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Re: 3d build Honda RC213v from 2020
Very cool subject Christian, still following this one!
Take a stand!
Re: 3d build Honda RC213v from 2020
1/6 scale? Wow!!!!!
-
- FOTA Chairman
- Posts: 2774
- Joined: Wed Jan 25, 2006 1:36 am
- Location: Melbourne, Australia
- Status: Offline
Re: 3d build Honda RC213v from 2020
Wow, this should be good! Looking forward to following this WIP
-
- Backmarker
- Posts: 321
- Joined: Wed Jan 12, 2011 3:29 pm
- Your Name: Dan
- Favorite F1 Team or Driver: Ferrari fan
- Location: Seattle Wa.
- Status: Offline
Re: 3d build Honda RC213v from 2020
This is great to see! I wish I could do this....someday perhaps
-
Topic author - FOTA Chairman
- Posts: 2253
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d build Honda RC213v from 2020
Thank`s for your kind words.
Today i managed to get the winglets done in a correct size and shape. And also the left foot rest is done so far.
Here are some before-after pics from the parts.
These are mostly fine changes but i ave to change them when i look at the pics from the real bike.
regards Christian
Today i managed to get the winglets done in a correct size and shape. And also the left foot rest is done so far.
Here are some before-after pics from the parts.
These are mostly fine changes but i ave to change them when i look at the pics from the real bike.
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
Topic author - FOTA Chairman
- Posts: 2253
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d build Honda RC213v from 2020
Last work for today was the chain of the bike.
The one from the file set was too basic. Now i got one from single rings and i try to print it with a simple chain lock.Hope it works at the end?
Regards Christian
The one from the file set was too basic. Now i got one from single rings and i try to print it with a simple chain lock.Hope it works at the end?
Regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
- Formula e
- Posts: 37
- Joined: Tue Mar 31, 2020 8:46 pm
- Your Name: Chris
- Favorite F1 Team or Driver: Kimi Raikkonen
- Location: CA
- Contact:
- Status: Offline
Re: 3d build Honda RC213v from 2020
New chain looks great! This is coming along nicely
Re: 3d build Honda RC213v from 2020
Nice improvement Christian, are you modeling everything in Meshmixxer?
Take a stand!
-
- FOTA Chairman
- Posts: 2082
- Joined: Sat Aug 02, 2008 4:52 pm
- Your Name: Dede
- Favorite F1 Team or Driver: ....
- Location: Ireland.
- Status: Offline
Re: 3d build Honda RC213v from 2020
Hi Christian,
Following with interest, looks great so far.
Following with interest, looks great so far.
Dede.