CBartholomew4677 : Jordan Honda EJ11 (2008 Group Build)
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
-
- Top Designer
- Posts: 757
- Joined: Sat Nov 27, 2004 7:20 pm
- Location: Brisbane, Australia
- Status: Offline
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
Hello,
No, I built the S27 BAR 003 (Monaco GP Version, ironically the same season as the Jordan) before, which was my first. It's around here on the site somewhere in the Completed section. I have to say that this one has been a lot easier and faster than the BAR 003. The Jordan has more white metal and less p.e. I'm starting to become a bit fod of the mm kits as of late. Maybe the MFH Ferrari F2007 or S27 Stewart SF3.
Cheers,
Chris
No, I built the S27 BAR 003 (Monaco GP Version, ironically the same season as the Jordan) before, which was my first. It's around here on the site somewhere in the Completed section. I have to say that this one has been a lot easier and faster than the BAR 003. The Jordan has more white metal and less p.e. I'm starting to become a bit fod of the mm kits as of late. Maybe the MFH Ferrari F2007 or S27 Stewart SF3.
Cheers,
Chris
-
- FOTA Chairman
- Posts: 2610
- Joined: Thu May 12, 2005 9:43 pm
- Location: Melbourne, Australia
- Status: Offline
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
Hello All,
I was getting a message that this previous thread was exceeding my upload limit. Does anyone know how I can delete old posts or increase my limit so I can attach pictures for this update? I appreciate the help.
Current status:D
ecals have been applied for the black sections and the shark mouth. I intend to seal over these with TS13 in order to have a consistent finish for the vehicle base color scheme. I added cf decal to the cockpit internal surface, and the ducting internal surfaces. You can see the cockpit stuff, but I think the air duct internals are tough to see when completed, but I'll do it anyhow. I added cf decl to the exhaust surround area, where the kit decas are simply black. From my reference, this is the right thing to do.
Wing endplates have the cf decals on the inside applied and are ready fr sealing.
Seat and steering wheel have made final completion and re waiting simply to be installed.
Exhausts have been completed. The kit actually didn't have exausts, so I made them out of aluminum tube, painted flat white and dusted up a bit drilled the body out a touch to fit.
Sealing of te body and bits will begin immediately, so hopefully I can have an update soon.
Hope you enjoy.
Cheers,
Chris
I was getting a message that this previous thread was exceeding my upload limit. Does anyone know how I can delete old posts or increase my limit so I can attach pictures for this update? I appreciate the help.
Current status:D
ecals have been applied for the black sections and the shark mouth. I intend to seal over these with TS13 in order to have a consistent finish for the vehicle base color scheme. I added cf decal to the cockpit internal surface, and the ducting internal surfaces. You can see the cockpit stuff, but I think the air duct internals are tough to see when completed, but I'll do it anyhow. I added cf decl to the exhaust surround area, where the kit decas are simply black. From my reference, this is the right thing to do.
Wing endplates have the cf decals on the inside applied and are ready fr sealing.
Seat and steering wheel have made final completion and re waiting simply to be installed.
Exhausts have been completed. The kit actually didn't have exausts, so I made them out of aluminum tube, painted flat white and dusted up a bit drilled the body out a touch to fit.
Sealing of te body and bits will begin immediately, so hopefully I can have an update soon.
Hope you enjoy.
Cheers,
Chris
-
- FIA President
- Posts: 1760
- Joined: Sun Apr 30, 1995 1:00 am
- Your Name: Eric Aitala
- Favorite F1 Team or Driver: Ferrari
- Location: State College, PA
- Contact:
- Status: Offline
HI,
You can go to here - http://www.f1m.com/classic/PNphpBB2-pro ... -1611.html - to see your quota. You can also see what attachments you have and remove them.
You've hit the 15MByte limit...
I need to figure out what to do here cause we have more people hitting their limit.
You could post in your Gallery on the main site...
Eric
You can go to here - http://www.f1m.com/classic/PNphpBB2-pro ... -1611.html - to see your quota. You can also see what attachments you have and remove them.
You've hit the 15MByte limit...
I need to figure out what to do here cause we have more people hitting their limit.
You could post in your Gallery on the main site...
Eric
CBartholomew4677 wrote:Hello All,
I was getting a message that this previous thread was exceeding my upload limit. Does anyone know how I can delete old posts or increase my limit so I can attach pictures for this update? I appreciate the help.
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
CBartholomew4677
Posted: May 25, 2008 - 08:47 AM
--------------------------------------------------------------------------------
Current status:
Decals have been applied for the black sections and the shark mouth. I intend to seal over these with TS13 in order to have a consistent finish for the vehicle base color scheme. I added cf decal to the cockpit internal surface, and the ducting internal surfaces. You can see the cockpit stuff, but I think the air duct internals are tough to see when completed, but I'll do it anyhow. I added cf decl to the exhaust surround area, where the kit decas are simply black. From my reference, this is the right thing to do.
Wing endplates have the cf decals on the inside applied and are ready fr sealing.
Seat and steering wheel have made final completion and re waiting simply to be installed.
Exhausts have been completed. The kit actually didn't have exausts, so I made them out of aluminum tube, painted flat white and dusted up a bit drilled the body out a touch to fit.
Sealing of te body and bits will begin immediately, so hopefully I can have an update soon.
Hope you enjoy.
Cheers,
Chris
----------------------------------------------------------------------------------------
Based on my previous post, I finally got my limit within bounds so I've got some updated pics for you all. Hope you all enjoy.
Cheers,
Chris
Posted: May 25, 2008 - 08:47 AM
--------------------------------------------------------------------------------
Current status:
Decals have been applied for the black sections and the shark mouth. I intend to seal over these with TS13 in order to have a consistent finish for the vehicle base color scheme. I added cf decal to the cockpit internal surface, and the ducting internal surfaces. You can see the cockpit stuff, but I think the air duct internals are tough to see when completed, but I'll do it anyhow. I added cf decl to the exhaust surround area, where the kit decas are simply black. From my reference, this is the right thing to do.
Wing endplates have the cf decals on the inside applied and are ready fr sealing.
Seat and steering wheel have made final completion and re waiting simply to be installed.
Exhausts have been completed. The kit actually didn't have exausts, so I made them out of aluminum tube, painted flat white and dusted up a bit drilled the body out a touch to fit.
Sealing of te body and bits will begin immediately, so hopefully I can have an update soon.
Hope you enjoy.
Cheers,
Chris
----------------------------------------------------------------------------------------
Based on my previous post, I finally got my limit within bounds so I've got some updated pics for you all. Hope you all enjoy.
Cheers,
Chris
- Attachments
-
- Jordan Honda EJ11 Overall Status 1.JPG (192.68 KiB) Viewed 635 times
-
- Jordan Honda EJ11 Overall Status 2.JPG (205.33 KiB) Viewed 638 times
-
- Jordan Honda EJ11 Body Sealed 11.JPG (237.98 KiB) Viewed 636 times
-
- Jordan Honda EJ11 Body Sealed 5.JPG (204.29 KiB) Viewed 640 times
-
- Jordan Honda EJ11 Body Sealed 2 .JPG (198.15 KiB) Viewed 637 times
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
OK, a few more pictures..... wings and exhaust.
Chris
Chris
- Attachments
-
- Jordan Honda EJ11 Front Wing Assembled 5.JPG (144.09 KiB) Viewed 634 times
-
- Jordan Honda EJ11 Front Wing Complete 2.JPG (159.76 KiB) Viewed 635 times
-
- Jordan Honda EJ11 Front Wing Complete 3.JPG (193.97 KiB) Viewed 634 times
-
- Jordan Honda EJ11 Rear Wing Complete 3.JPG (233.34 KiB) Viewed 636 times
-
- Jordan Honda EJ11 Rear Wing Complete 7.JPG (183.09 KiB) Viewed 636 times
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 128 Views
-
Last post by gp-models