Ferrari 312T4 Dijon 1979 Tamiya 1:12
-
Topic author - F1 Test Driver
- Posts: 228
- Joined: Thu Nov 22, 2012 3:48 pm
- Your Name: Pierluigi
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Italy
- Status: Offline
Ferrari 312T4 Dijon 1979 Tamiya 1:12
Hi all,
I'm working on the Tamiya Ferrari 312T4 1:12, I will make the car Villeneuve raced at Dijon dueling with Arnoux. Many thanks to Bastien spotters guide!
I started some months ago and now I have something to show to you, I'm not much fast...
I tryed and replaced monocoque rivets with 3d printed rivets (first time I try), AK polished aluminium and some Tremonia PE.
Primer and gloss black Tamiya spray can before AK Polished aluminium.
Thanks for looking, any comments welcome
Pierluigi
- - - - -the lower part has not gloss black under polished aluminuim, ther is some difference... - -
continues
I'm working on the Tamiya Ferrari 312T4 1:12, I will make the car Villeneuve raced at Dijon dueling with Arnoux. Many thanks to Bastien spotters guide!
I started some months ago and now I have something to show to you, I'm not much fast...
I tryed and replaced monocoque rivets with 3d printed rivets (first time I try), AK polished aluminium and some Tremonia PE.
Primer and gloss black Tamiya spray can before AK Polished aluminium.
Thanks for looking, any comments welcome
Pierluigi
- - - - -the lower part has not gloss black under polished aluminuim, ther is some difference... - -
continues
If everything seems under control, you're just not going fast enough
-
Topic author - F1 Test Driver
- Posts: 228
- Joined: Thu Nov 22, 2012 3:48 pm
- Your Name: Pierluigi
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Italy
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
-kit seat belts with PE
-
-
-
-
-
-
-
-I added tubes and wires to braking system
Last edited by Luzne on Fri Jan 12, 2024 12:28 pm, edited 1 time in total.
If everything seems under control, you're just not going fast enough
-
Topic author - F1 Test Driver
- Posts: 228
- Joined: Thu Nov 22, 2012 3:48 pm
- Your Name: Pierluigi
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Italy
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
-I twisted a part of black tube of the kit in order to reproduce the wire behind the wheel and I added some toggle switches
-
-
-
-
-
If everything seems under control, you're just not going fast enough
-
Topic author - F1 Test Driver
- Posts: 228
- Joined: Thu Nov 22, 2012 3:48 pm
- Your Name: Pierluigi
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Italy
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
Monocoque almost completed
- - -
now to the engine.
Ciao,
Pierluigi
- - -
now to the engine.
Ciao,
Pierluigi
If everything seems under control, you're just not going fast enough
-
Topic author - F1 Test Driver
- Posts: 228
- Joined: Thu Nov 22, 2012 3:48 pm
- Your Name: Pierluigi
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Italy
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
Hi all,
I used AK Titanium for the engine.
- -I bought some 3d printed parts by Smirkoff via Shapeways in order to better replicate fiberglass rear brake air intakes and the base of intake pipes, I painted them with a very diluted mix of deep yellow, green ochre and bronze colors - -I like the final effect.
Ciao,
Pierluigi
I used AK Titanium for the engine.
- -I bought some 3d printed parts by Smirkoff via Shapeways in order to better replicate fiberglass rear brake air intakes and the base of intake pipes, I painted them with a very diluted mix of deep yellow, green ochre and bronze colors - -I like the final effect.
Ciao,
Pierluigi
If everything seems under control, you're just not going fast enough
-
- Formula e
- Posts: 39
- Joined: Tue Jun 16, 2015 8:37 pm
- Your Name: DJ
- Favorite F1 Team or Driver: Lewis Hamilton
- Location: Newport Beach
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
Looks great so far!!
-
- Top Designer
- Posts: 703
- Joined: Tue Jul 01, 2014 5:13 am
- Your Name: Martijn
- Favorite F1 Team or Driver: -Ferrari
-Benetton
-Michael Schumacher
-Ayrton Senna - Location: Netherlands
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
Lovely work so far! I’m doing the T3 ATM so very interested in any T model.
Keep up the good work!
Keep up the good work!
-
- Top Designer
- Posts: 700
- Joined: Tue May 30, 2006 8:44 pm
- Favorite F1 Team or Driver: Ventisette Rosso
- Location: Toronto, Ontario
- Contact:
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
Off to an amazing start.
-
Topic author - F1 Test Driver
- Posts: 228
- Joined: Thu Nov 22, 2012 3:48 pm
- Your Name: Pierluigi
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Italy
- Status: Offline
Re: Ferrari 312T4 Dijon 1979 Tamiya 1:12
Hi all,
a couple of weeks ago I bought a resin 3d printer, the Elegoo Mars 4 Ultra, and I'm really happy with the purchase...
Now I can print my 3d parts at home, great fun!
I printed some parts for the battery: the battery cover (painted black), battery caps (painted yellow), and battery teminals.
I removed the battery support molded together with the battery and replaced it with a folded metal sheet
- - - -
a couple of weeks ago I bought a resin 3d printer, the Elegoo Mars 4 Ultra, and I'm really happy with the purchase...
Now I can print my 3d parts at home, great fun!
I printed some parts for the battery: the battery cover (painted black), battery caps (painted yellow), and battery teminals.
I removed the battery support molded together with the battery and replaced it with a folded metal sheet
- - - -
If everything seems under control, you're just not going fast enough
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 302 Views
-
Last post by OultonPark
-
- 18 Replies
- 685 Views
-
Last post by SanMarino
-
- 5 Replies
- 202 Views
-
Last post by marlborored