Mclaren MP4/2C 1/12 protar
-
Topic author - World Champion
- Posts: 641
- Joined: Fri May 12, 2006 4:41 pm
- Your Name: Gary McIntyre
- Favorite F1 Team or Driver: Mclaren, Senna
- Location: hinesville,ga
- Status: Offline
Mclaren MP4/2C 1/12 protar
Hi everyone,spent part of the day getting the engine together and primed and getting familar with the parts.Haven't seen one of these built so if anybody has any input on issues i would like to hear about them.Does anybody have any suggestions on the rivets for the front nose under the body,they are not casted in.
Regards,Gary
Regards,Gary
-
- FOTA Chairman
- Posts: 3624
- Joined: Tue Aug 23, 2005 2:42 am
- Favorite F1 Team or Driver: Senna
- Location: Toronto
- Status: Online
Re: Mclaren MP4/2C 1/12 protar
That's going to be a challenge. Looking good so far. There was an article on modelersite.com. But I think model
was never finished. Check it out, maybe there was another completed build there. daves presented his great build
of this kit in the forums a while ago. He might provide good info it you ask, I think.
http://www.f1m.com/forum/viewtopic.php?t=4631
was never finished. Check it out, maybe there was another completed build there. daves presented his great build
of this kit in the forums a while ago. He might provide good info it you ask, I think.
http://www.f1m.com/forum/viewtopic.php?t=4631
Sergey's Blog - http://lezdep.blogspot.com/ | Public Gallery - http://picasaweb.google.com/lezdep
Re: Mclaren MP4/2C 1/12 protar
Hello,
I'm in the proces of building one of them right now ,startet over a year ago
I f****d up on painting several times ,but the thing is coming together now
I will post some pictures later.
bye.
I'm in the proces of building one of them right now ,startet over a year ago
I f****d up on painting several times ,but the thing is coming together now
I will post some pictures later.
bye.
Re: Mclaren MP4/2C 1/12 protar
WooHoo !!! A 12th. ! Good onya, nice to see it !garymc wrote:Hi everyone,spent part of the day getting the engine together and primed and getting familar with the parts.Haven't seen one of these built so if anybody has any input on issues i would like to hear about them.Does anybody have any suggestions on the rivets for the front nose under the body,they are not casted in.
Regards,Gary
Perhaps the decal style rivets mentioned here recently (43Mike?) in their largest size would work for you?
It's plain that there are some gaps to deal with but I'm sure that you're up to it.
In that regard, I'd recommend a pretty stout epoxy wherever possible ...... those are some large metal castings and they will grow/shrink considerably with temperature changes.
The engine calls out for a double handful of micro-fasteners ....... si?
Good luck with this one .......... looking forward to progress reports!
Cheers,
-elh-
-
- FOTA Chairman
- Posts: 3361
- Joined: Mon Apr 14, 2003 4:17 pm
- Location: Oxford. UK
- Status: Offline
Re: Mclaren MP4/2C 1/12 protar
Hi Gary, My mate Dan here in the UK did the build on the modeler site www.modelersite.com and it's superb and well worth looking up. With regard to rivets the SMS etch ones should be fine,I attach mine with a "blob" of varnish.
Atb,Alexp.
Atb,Alexp.
-
- FOTA Chairman
- Posts: 2076
- Joined: Sat Aug 02, 2008 4:52 pm
- Your Name: Dede
- Favorite F1 Team or Driver: ....
- Location: Ireland.
- Status: Offline
Re: Mclaren MP4/2C 1/12 protar
Looking forward to this one, as its a Protar it will be challenging I'm sure but not beyond your skills either...
Good Luck..
Good Luck..
Dede.
Re: Mclaren MP4/2C 1/12 protar
I will be keeping an eye on this build.
Is the engine and transmission in metal casting too?
Is the engine and transmission in metal casting too?
PUN
-
Topic author - World Champion
- Posts: 641
- Joined: Fri May 12, 2006 4:41 pm
- Your Name: Gary McIntyre
- Favorite F1 Team or Driver: Mclaren, Senna
- Location: hinesville,ga
- Status: Offline
Re: Mclaren MP4/2C 1/12 protar
Just went threw the modelersite build report on this monster,oh boy what fun i'm in for.
I guess i know what i'll be doing for 2010....sigh
Regards,Gary
The engine/trans,suspension,monocoque are all in metal which look pretty good,just alot of flashing to be cleaned up.Lazbun wrote:I will be keeping an eye on this build.
Is the engine and transmission in metal casting too?
I guess i know what i'll be doing for 2010....sigh
Regards,Gary
-
- FOTA Chairman
- Posts: 2933
- Joined: Mon Mar 21, 2005 8:27 pm
- Your Name: Indycals
- Favorite F1 Team or Driver: Lotus
- Location: 6450'/1955m Colorado USA
- Contact:
- Status: Offline
Re: Mclaren MP4/2C 1/12 protar
Does anyone else find it ironic that one of the first cars with a 'plastic' tub has said tub replicated in 'metal'?
-
- FOTA Chairman
- Posts: 2404
- Joined: Thu Feb 14, 2002 8:17 am
- Location: Masshole
- Status: Offline
Re: Mclaren MP4/2C 1/12 protar
Re ally happy to hear at least 3 or 4 of these are being built instead of sitting in someone's closet\basement\safe deposit box waiting for the price to go up.