Jean Todt's Ferrari FXX. Using SMS superset
-
- FOTA Chairman
- Posts: 3361
- Joined: Mon Apr 14, 2003 4:17 pm
- Location: Oxford. UK
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
Hi, This is looking fab,the exhausts look great and I love the finish on the heads.Can,t wait to see it finished.
By the way the white stripe was the way to go!
Regards,Alex
By the way the white stripe was the way to go!
Regards,Alex
-
Topic author - F2 Champion
- Posts: 93
- Joined: Sun Nov 23, 2008 8:10 am
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
Thanks guys....
Well I buttoned up the Interior and even installed it today....
I also scratch built out of solid aluminum rod the lap counter on the dash and wired it after painting it clear blue.
The front end is all complete as well. Basically from the box cleanly done. It will all be covered anyways.....
Here is a few pics of the chassis about 90% done.....
more soon........
DaveT
Well I buttoned up the Interior and even installed it today....
I also scratch built out of solid aluminum rod the lap counter on the dash and wired it after painting it clear blue.
The front end is all complete as well. Basically from the box cleanly done. It will all be covered anyways.....
Here is a few pics of the chassis about 90% done.....
more soon........
DaveT
-
- FOTA Chairman
- Posts: 2905
- Joined: Sat Sep 20, 2003 12:38 am
- Favorite F1 Team or Driver: Alfa Romeo, McLaren, Williams
- Location: Melbourne, Australia
- Contact:
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
I am impressed, i have never seen one of these stripped down, great looking kit and very nice build.
-
Topic author - F2 Champion
- Posts: 93
- Joined: Sun Nov 23, 2008 8:10 am
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
Thanks guys......
One really cool part of the SMS kit is the turned aluminum shocks...
A big improvement over the kit parts....
Here they are installed....
One really cool part of the SMS kit is the turned aluminum shocks...
A big improvement over the kit parts....
Here they are installed....
-
- FOTA Chairman
- Posts: 2610
- Joined: Thu May 12, 2005 9:43 pm
- Location: Melbourne, Australia
- Status: Offline
-
Topic author - F2 Champion
- Posts: 93
- Joined: Sun Nov 23, 2008 8:10 am
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
With a February first article deadline looming I made loads of progress this weekend all documented too!
Instead of painting the SMS mesh I blackened it. I always wanted to try the stuff and when I saw it in Atlanta at the Mega Hobbytown I snatched it up. It didnt dissapoint.... neat to watch it change when you dunk it....
I even did the PE radiator plates from the SMS superset with the blacken it ... a shame they will be covered by the air ducts....
Here are the side pods all installed in the engine bay.
Pods are installed and all plumbing is complete. I used Pro tech .045 line and fittings along with Detailmaster #4 Hardline to make up the oil cooling system like the 1:1 car has. I even added fuel plumbing by the fuel receptacle similar to the 1:1 car. At this point the engine bay is complete. The strut bracing is a combination of aluminum tubing and PE hardware from the superkit.
Front glass and detailing was also done at this time. Instead of the kit decal I decided to paint the flat black sunscreen and add SMS PE hold down plates.
A few naked shots before doors and front clip are installed...
Door Detailing is complete!
Doors are now in place along with the front clip.
It is at this point that I decided that I am going to make this car a wheels off displayed car. The brake detail is so beautiful and the car will look very cool all opened up with the wheels off. I will fix solid #5 DM line cut to perfect equal length and epoxy them in the positions where the 1:1 car has the jackposts that pop out the bottom when pitting for tires... my first extreme FXX if you will.... Pity I did not open the hood... I already have a red one wheels on that will look great next to this one....
Here are some mock ups.....
DaveT
Instead of painting the SMS mesh I blackened it. I always wanted to try the stuff and when I saw it in Atlanta at the Mega Hobbytown I snatched it up. It didnt dissapoint.... neat to watch it change when you dunk it....
I even did the PE radiator plates from the SMS superset with the blacken it ... a shame they will be covered by the air ducts....
Here are the side pods all installed in the engine bay.
Pods are installed and all plumbing is complete. I used Pro tech .045 line and fittings along with Detailmaster #4 Hardline to make up the oil cooling system like the 1:1 car has. I even added fuel plumbing by the fuel receptacle similar to the 1:1 car. At this point the engine bay is complete. The strut bracing is a combination of aluminum tubing and PE hardware from the superkit.
Front glass and detailing was also done at this time. Instead of the kit decal I decided to paint the flat black sunscreen and add SMS PE hold down plates.
A few naked shots before doors and front clip are installed...
Door Detailing is complete!
Doors are now in place along with the front clip.
It is at this point that I decided that I am going to make this car a wheels off displayed car. The brake detail is so beautiful and the car will look very cool all opened up with the wheels off. I will fix solid #5 DM line cut to perfect equal length and epoxy them in the positions where the 1:1 car has the jackposts that pop out the bottom when pitting for tires... my first extreme FXX if you will.... Pity I did not open the hood... I already have a red one wheels on that will look great next to this one....
Here are some mock ups.....
DaveT
-
- FOTA Chairman
- Posts: 2905
- Joined: Sat Sep 20, 2003 12:38 am
- Favorite F1 Team or Driver: Alfa Romeo, McLaren, Williams
- Location: Melbourne, Australia
- Contact:
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
Sweet looking job Dave, very impressive workmanship. I can only dream of doing this sort of work myself.
-
- FOTA Vice Chairman
- Posts: 1901
- Joined: Sun Apr 18, 2004 3:38 am
- Favorite F1 Team or Driver: Jacques Villeneuve
- Location: Toronto, Canada
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
very nice, congratulations.
-
- Backmarker
- Posts: 318
- Joined: Tue Jan 29, 2008 4:27 pm
- Favorite F1 Team or Driver: Wolf
- Location: Ontario, Canada
- Status: Offline
Re: Jean Todt's Ferrari FXX. Using SMS superset
Incredible build. Thoroughly enjoyed watching this WIP
-
- Top Designer
- Posts: 757
- Joined: Sat Nov 27, 2004 7:20 pm
- Location: Brisbane, Australia
- Status: Offline
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 432 Views
-
Last post by dingo07