1/12 Kremer K3 Porsche 935

capri-schorsch · Post by **capri-schorsch** » Sat Dec 22, 2018 11:17 am

Yes, would be easier.
But I see it only as a template. I will sand them down and use small sheet for the cap when it's done at the end.

gp-models · Post by **gp-models** » Sun Dec 23, 2018 10:04 am

Nice base to start things up Christian, looking forward to your progress!

capri-schorsch · Post by **capri-schorsch** » Sun Dec 23, 2018 11:18 am

Upps,something went wrong here.

Have to cut that printed windshield out.

Looks better now,but still a lot of work to do.I used the Tamiya window and cut an spare body from the 934.

regards Christian

capri-schorsch · Post by **capri-schorsch** » Thu Dec 27, 2018 2:57 pm

Now i found a solution for the roof which makes me to 95% happy.

I also used the Tamiya front hood and only have to sand a tiny bit on both sides.

Next step will be the air intakes at both sides before i cant start with 2k putty when i am back at work in January.

regards Christian

scaleautofactory · Post by **scaleautofactory** » Sat Dec 29, 2018 4:39 pm

Start fixing the problem zones...
Front window:
Red = wrong / green = fixed

gp-models · Post by **gp-models** » Sun Dec 30, 2018 10:52 am

The edge of the roof needs to be more rounded Thorsten, depending on the top view. Realy hard to match the proportions of a 911, like the way you changed that point Christian as it is a great help for the front window "making of" as the Tamiya window is a good template to use for vacuum forming!

scaleautofactory · Post by **scaleautofactory** » Sun Dec 30, 2018 11:17 am

Hmm - that keeps me too busy - i stop here and go back to nicer models...

capri-schorsch · Post by **capri-schorsch** » Sun Dec 30, 2018 12:42 pm

Nicer than a K3 ???

capri-schorsch · Post by **capri-schorsch** » Tue Jan 15, 2019 2:55 pm

Today i finished all the bodywork changes.Hope so?
Some shots of primer and tomorrow the rest.Will show some pics when its done.

In the meantime i started with the tires.
The tamiya 935 used the same tire size like the Kremer K3.So i started with them but they are very thin and wobbly.
I made an inner spacer to get more strength in it.

Thats how it looked mounted.

Should be hard enough for casting.

The mold is half filled with the tires.The rest will be cast.

Some layers silicone was added.

Now are both half sides cast and the rest will follow tomorrow.

regards Christian

capri-schorsch · Post by **capri-schorsch** » Wed Jan 16, 2019 2:36 pm

Sorry,only poor quality smartphone pics.

Quiet happy with the body and the tires.The original rims fits very well into the resin.
The body needs now a lot of fine sanding.

regards Christian

The F1M Forums

1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935

Re: 1/12 Kremer K3 Porsche 935