The F1M Forums

I could extract the mesh from the f1 2020 game



Will take a while to transform it for 3d printing...
Currently i'm working on a 1/8 Porsche 908/3

3d printing will be done by https://craftcloud3d.com/ - estimated cost for the Porsche are currently 800€ - cheap for a 1/8 model and printed in Resin.
The W11 in 1/12 will be ~ 300€ for the parts and the cost for decals...

plastiksurgeon wrote:They are ugly, especially from a profile....

Steve

Yes, long as a 50.000 tons tanker. You see the nose pass and you can go have a pee and then once back you still have to wait for the rear wing to come
They are ridiculously long.

lezdep wrote:If there is 1/12 kit of W11 or W10, I will not be able to resist. Bring it on !

Have 1/20 W10 from NewScratch. It looks to be a decent kit. But I have to reserve final judgement until I actually
build it. Painting black gradient on engine cover is a major challenge.

https://www.youtube.com/playlist?list=P ... cb0ZHzadk1

JamesB wrote:

plastiksurgeon wrote:They are ugly, especially from a profile....

Steve

Yes, long as a 50.000 tons tanker. You see the nose pass and you can go have a pee and then once back you still have to wait for the rear wing to come
They are ridiculously long.

Indeed James ! I HAVE ALWAYS SAID THAT THE CARS ARE NOW SO LONG THAT THE NOSE OF THE CAR IS STARTING ONE LAP WHILE THE BACK OF THE CAR IS STARTING THE LAP BEFORE.

Steve

These barge boat length cars should make a fun Imola, or a disaster.

scaleautofactory wrote:I could extract the mesh from the f1 2020 game
...

Will take a while to transform it for 3d printing...
Currently i'm working on a 1/8 Porsche 908/3
3d printing will be done by https://craftcloud3d.com/ - estimated cost for the Porsche are currently 800€ - cheap for a 1/8 model and printed in Resin.
The W11 in 1/12 will be ~ 300€ for the parts and the cost for decals...

Ah that is clever.. there was a guy who exported all the F12019 cars for 3D modelling, but he did not do the F1 2020...
https://www.racedepartment.com/download ... hop.27469/

I got the link from this forum

BMW wrote:

scaleautofactory wrote:I could extract the mesh from the f1 2020 game
...

Will take a while to transform it for 3d printing...
Currently i'm working on a 1/8 Porsche 908/3
3d printing will be done by https://craftcloud3d.com/ - estimated cost for the Porsche are currently 800€ - cheap for a 1/8 model and printed in Resin.
The W11 in 1/12 will be ~ 300€ for the parts and the cost for decals...

Ah that is clever.. there was a guy who exported all the F12019 cars for 3D modelling, but he did not do the F1 2020...
https://www.racedepartment.com/download ... hop.27469/

I got the link from this forum

Yes, he could not export the meshes incl. material images via 3dsimed - because 3dsimed is not updated for f1 2020 yet.
There are some other tools available to get the meshes - after extraction some minor adjustments required to get all parts on the right position. Now i add thickness to the small winglets for 3d printing and making the parts solid. The Floor needs a lot of work, so many winglets and badgeboard parts...

Mercedes W11 BLACK

Andrey wrote:Mercedes W11 BLACK

Is there a link where to buy this from?

Thanks!
Tyrone.

Tyrone wrote:

Andrey wrote:Mercedes W11 BLACK

Is there a link where to buy this from?

Thanks!
Tyrone.

https://www.hobbyeasy.com/en/data/gcx4q ... 6c6rd.html