F40 work in progress

Models in progress... including non-F1 models.
Post Reply
User avatar

Topic author
f40
Top Designer
Top Designer
Posts: 738
Joined: Mon Dec 03, 2007 2:31 pm
Status: Offline

F40 work in progress

Post by f40 »

I am having trouble gettting around this site, but wanted all of you to know how inspired I am by your posts. I am trying to share some photos of my F40 as well on this forum, but somehow only got a couple posted on a gallery (they are too small to see well) If someone could give me some tips on how to post my pictures, I'd appreciate it. Thanks
User avatar

BigDuke6
Major Constructor
Major Constructor
Posts: 1185
Joined: Sun Feb 10, 2008 10:15 pm
Location: Sydney, Aus
Status: Offline

Re: F40 work in progress

Post by BigDuke6 »

Hi - Try and upload your pics to photobucket.com and then past the links into your posts. PB is a good place to keep all your images and its easy to perform a bulk upload =)

Good luck!
User avatar

f1m
FIA President
FIA President
Posts: 1728
Joined: Sun Apr 30, 1995 1:00 am
Your Name: Eric Aitala
Favorite F1 Team or Driver: Ferrari
Location: State College, PA
Contact:
Status: Offline
United States of America

Re: F40 work in progress

Post by f1m »

HI,

Actually the pics were gynormous and f40 was only seeing the thumbnails. Sometimes the gallery has issues with images that big and I have to kick it.

See http://www.f1m.com/gallery/v/User_Album ... ewsIndex=1" onclick="window.open(this.href);return false;

Eric


f40 wrote:I am having trouble gettting around this site, but wanted all of you to know how inspired I am by your posts. I am trying to share some photos of my F40 as well on this forum, but somehow only got a couple posted on a gallery (they are too small to see well) If someone could give me some tips on how to post my pictures, I'd appreciate it. Thanks
User avatar

taliesen
Midfield
Midfield
Posts: 462
Joined: Fri Sep 21, 2007 3:45 pm
Location: DFW, Texas, USA
Status: Offline

Re: F40 work in progress

Post by taliesen »

What's there looks good! Is that a Pocher? They seem to be popping up all over lately :)
Jonathan

No trees were harmed in the sending of this message; however, millions of electrons were terribly inconvenienced.
User avatar

Tony126c2
F1 Test Driver
F1 Test Driver
Posts: 225
Joined: Wed Dec 17, 2008 6:13 am
Location: Netherlands
Status: Offline

Re: F40 work in progress

Post by Tony126c2 »

Is that a Pocher?
Definitely! and the engine is build up with the Autograph transkit

Welcome F40 and keep them coming you are # 4 now :)
Regards
Ton

-------------------------------------------------------------------------------------------------------------------------

Where there's a will there's a way
User avatar

Topic author
f40
Top Designer
Top Designer
Posts: 738
Joined: Mon Dec 03, 2007 2:31 pm
Status: Offline

Re: F40 work in progress

Post by f40 »

Thanks for looking. The engine is made up of a lot of scratch built parts. The exhaust system is made up of cut stainless steel tubing which was weathered by using a cigar lighter. All the turbo braided line fittings were machined. The pully on the air conditioned unit was also machined. The water cooler system on top of the engine was built with milliput putty. The turbos were also redone and modified from the pocher kit. I currently working on the exhaust system in the rear, which will be made up of stainless steel using a tube bender.
User avatar

Tony126c2
F1 Test Driver
F1 Test Driver
Posts: 225
Joined: Wed Dec 17, 2008 6:13 am
Location: Netherlands
Status: Offline

Re: F40 work in progress

Post by Tony126c2 »

The engine is made up of a lot of scratch built parts
A second look showed me that I am dead wrong! :cry: Great job on the engine!
Regards
Ton

-------------------------------------------------------------------------------------------------------------------------

Where there's a will there's a way
User avatar

Topic author
f40
Top Designer
Top Designer
Posts: 738
Joined: Mon Dec 03, 2007 2:31 pm
Status: Offline

Re: F40 work in progress

Post by f40 »

Tony- I checked out the photos of your F40- you are doing an amazing job! Your progress is well ahead of me! I will be following your WIP, but I have a long way to go yet. I am working off the F40 manual.
User avatar

bmwmech1
F2 Champion
F2 Champion
Posts: 143
Joined: Fri Feb 29, 2008 9:28 pm
Status: Offline

Re: F40 work in progress

Post by bmwmech1 »

Tony126c2 wrote:
The engine is made up of a lot of scratch built parts
A second look showed me that I am dead wrong! :cry: Great job on the engine!
I'm with you Tony... I thought it was the Autograph TK until I looked again. Excellent job on the motor and chassis for that matter, too! Hard to believe there are 4 of these F40's on this forum alone, now! I would also like to point out the great work on the A/C compressor, alternator and breather tube that ties into the cam covers. The coolant manifolds are excellent as well... maybe I should get you to make a set for me, as I don't have mine scratchbuilt yet. :D :D :D Since you are using the same reference that Tony and I are using, are you planning to do anything with the intake/throttle body/fuel distribution areas? I know the kit parts are severely lacking in detail/accuracy. Nice job with the turbos also... another sorely lacking-for-detail item. These things are what got me motivated to build the frame out of brass. Not enough detail for the size of the kit!

BM1
User avatar

Topic author
f40
Top Designer
Top Designer
Posts: 738
Joined: Mon Dec 03, 2007 2:31 pm
Status: Offline

Re: F40 work in progress

Post by f40 »

Thanks for the compliments- I am a long way from completing the motor, but I will be scratch building the fuel injection to the best of my abilities. I am definitly keeping my eyes on your WIP-so I can learn some things from you-I am still amazed at the framework that you have done!
Post Reply