1/24 Hasegawa Nissan R91CP

Finished models...
User avatar

Topic author
aracefan
F2 Champion
F2 Champion
Posts: 128
Joined: Wed Sep 11, 2019 5:15 pm
Favorite F1 Team or Driver: McLaren
Status: Offline
United States of America

1/24 Hasegawa Nissan R91CP

Post by aracefan »

1/24 Hasegawa Nissan R91CP Gr.C car
First kit using the airbrush, learned a lot,

Painted with Tamiya primer and acrylic paints,
Semi-gloss clear


Posted pics in the wip thread but figured I would post some in a completed thread.
Comments and critique welcome... don't mind the critique, really.
I did my best for my skills to date, but every time I do a kit I learn.
And using the AB was a bit of a big learning curve. :lol:

First time using Tamiya Panel liner on the body - used it a couple times on the engine, brakes, etc... need more practice here.

Image

Image

Surprised by the level of detail in the Hasegawa kit body.

Image

Image

Image

Image

Image

Image

Thanks for looking! And hope you enjoyed it, I really enjoyed building it, pretty proud of how it turned out.
Enjoyed the challenge of and learning how to use the AB.
User avatar

Topic author
aracefan
F2 Champion
F2 Champion
Posts: 128
Joined: Wed Sep 11, 2019 5:15 pm
Favorite F1 Team or Driver: McLaren
Status: Offline
United States of America

Re: 1/24 Hasegawa Nissan R91CP

Post by aracefan »

Could a mod please move this to the "Sports Car" section... I mistakenly posted in here, sorry 'bout that.
User avatar

whatisdeletrazdoing
Midfield
Midfield
Posts: 467
Joined: Fri Jul 01, 2016 2:14 am
Favorite F1 Team or Driver: Super Aguri, Ligier, Minardi, Rial
Status: Offline
United States of America

Re: 1/24 Hasegawa Nissan R91CP

Post by whatisdeletrazdoing »

Nice looking build! I enjoyed following it.
User avatar

gp-models
FOTA Chairman
FOTA Chairman
Posts: 3446
Joined: Sun Oct 07, 2012 2:17 pm
Status: Offline

Re: 1/24 Hasegawa Nissan R91CP

Post by gp-models »

whatisdeletrazdoing wrote:Nice looking build! I enjoyed following it.

+1
Turned out pretty nice, especially for the first time using an airbrush! I`m impressed how good the fitting of the cowlings is, expected a bit more gaps but obviously the fit is tight and nice. Great job!
Take a stand!
User avatar

CK
Constructors Champion
Constructors Champion
Posts: 1305
Joined: Mon Mar 06, 2006 9:38 am
Your Name: C K
Favorite F1 Team or Driver: Mercedes, McLaren, Williams
Location: Canada
Status: Offline
Canada

Re: 1/24 Hasegawa Nissan R91CP

Post by CK »

A very neatly build and finished car!

Your first air brush job looks much better than mine. :D Tamiya acrylic (water base ones) can sometimes be tricky to spray.

One curious question, should the finish be semi-gloss? From pictures, the car looks to have a gloss finish.
C K
Canada
User avatar

Topic author
aracefan
F2 Champion
F2 Champion
Posts: 128
Joined: Wed Sep 11, 2019 5:15 pm
Favorite F1 Team or Driver: McLaren
Status: Offline
United States of America

Re: 1/24 Hasegawa Nissan R91CP

Post by aracefan »

whatisdeletrazdoing wrote:Nice looking build! I enjoyed following it.
Thanks so much, really appreciate it. Learned a lot during the airbrushing process, several mistakes made but ended "ok".
gp-models wrote:
whatisdeletrazdoing wrote:Nice looking build! I enjoyed following it.
+1
Turned out pretty nice, especially for the first time using an airbrush! I`m impressed how good the fitting of the cowlings is, expected a bit more gaps but obviously the fit is tight and nice. Great job!
Thanks GP!! I test fit the body pieces now, especially if they are removable. I used to fly through kits and would be embarrassed to take a pic of them let alone share them. :lol: None of the body is glued down, the front, main, or rear cowling... been trying to get them to all "behave", and can be a challenge.

CK wrote:A very neatly build and finished car!

Your first air brush job looks much better than mine. :D


Don't know about that... but thank you, sir. This was my guinea pig kit for the airbrush, and thank goodness, didn't make any detrimental mistakes with it.
CK wrote:Tamiya acrylic (water base ones) can sometimes be tricky to spray.

One curious question, should the finish be semi-gloss? From pictures, the car looks to have a gloss finish.
They were definitely a challenge... there is a bit of orange peel (know what that is now) and tried to sand it back a bit. Had to re-shoot the red and the blue. Have a bit on top of the cockpit and there's a touch on the front part under the CALSONIC decal, but I know what it is now and how to try and avoid it.

And yes, probably, it should be a glossy finish but the LHS shop was out and I had semi-gloss at the house. Plus I didn't really want it to look like a new car on the showroom floor. I kinda like the way the semi-gloss looks - lets the color shine without being too perfect.

Thanks for all the comments, guys, really appreciate it. Looking to do better on the next one!!
User avatar

vekkuli
FOTA Chairman
FOTA Chairman
Posts: 4433
Joined: Wed Dec 21, 2005 3:20 pm
Favorite F1 Team or Driver: Stake Sauber
Location: Oulu-Uleåborg Finland
Status: Offline
Finland

Re: 1/24 Hasegawa Nissan R91CP

Post by vekkuli »

Such a good looking Build, congratulations 8) !
User avatar

daveyman
FOTA Chairman
FOTA Chairman
Posts: 4535
Joined: Sun Jun 24, 2007 11:39 am
Favorite F1 Team or Driver: Riccardo Patrese
Location: Hull, England.
Status: Offline
Great Britain

Re: 1/24 Hasegawa Nissan R91CP

Post by daveyman »

Nice result. Have enjoyed following your build.
User avatar

CelicaGT
F1 Test Driver
F1 Test Driver
Posts: 268
Joined: Wed Jun 24, 2009 12:50 am
Favorite F1 Team or Driver: Jim Clark
Contact:
Status: Offline
United States of America

Re: 1/24 Hasegawa Nissan R91CP

Post by CelicaGT »

It looks really good! Such an awesome beast of a racecar too. Nice work, and quick build too.

I still can't get over that they skipped including the engine. With such nice detail you'd think it'd make for a great model to display with the cowl off.
User avatar

CK
Constructors Champion
Constructors Champion
Posts: 1305
Joined: Mon Mar 06, 2006 9:38 am
Your Name: C K
Favorite F1 Team or Driver: Mercedes, McLaren, Williams
Location: Canada
Status: Offline
Canada

Re: 1/24 Hasegawa Nissan R91CP

Post by CK »

Hi,

Thanks for explaining your choice of semi gloss finish. It does it job. You have done a real good masking. I was wondering whether you used decal for the white.

I find it difficult to prevent orange peel using Tamiya water base acrylic color. I already use Tamiya retarding agent to slow down the drying. It does improve the finish. I still need to sand and polish the paint if I need a mirror finish.
C K
Canada
Post Reply