Adventures in soldering: The GT40 project Weber carb 2/20/17
-
- FOTA Chairman
- Posts: 4038
- Joined: Sun Apr 03, 2011 12:05 pm
- Location: Tokyo Japan
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/14/16 update
My respect for your precision, watch-making-like metal working skills just increased 1000-fold, when I saw how tiny some of those (brake pedal assembly and other parts) are compared to your fingers!
Holy Bernie Ecclestone! How do you do that!? I stand in gob-smacked awe!
Cheers, Chris
Holy Bernie Ecclestone! How do you do that!? I stand in gob-smacked awe!
Cheers, Chris
-
- FOTA Vice Chairman
- Posts: 1521
- Joined: Tue Dec 17, 2013 9:10 pm
- Favorite F1 Team or Driver: Renault Sport
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/14/16 update
Wow! True model making.
-
- F2 Champion
- Posts: 130
- Joined: Sun Dec 03, 2006 11:29 am
- Location: Out in the sticks of Eagar,AZ
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/14/16 update
To see it in person is even better! We all know how big the average finger is, but it just does not covey the precision and scale that seeing it in real life does. I knew the parts were tiny to begin with but holy cow (!!!!!!!!!) they are SMALL!!!!!! There is no other words to describe this build (that I can say in a public forum with kids around lol). There are those of us on another plain then there's Randy! Way above at that!
Eagle50 wrote:My respect for your precision, watch-making-like metal working skills just increased 1000-fold, when I saw how tiny some of those (brake pedal assembly and other parts) are compared to your fingers!
Holy Bernie Ecclestone! How do you do that!? I stand in gob-smacked awe!
Cheers, Chris
-
Topic author - F2 Champion
- Posts: 107
- Joined: Sun Dec 28, 2014 1:51 pm
- Favorite F1 Team or Driver: Gulf
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/14/16 update
Hi Folks,
A big thank you to all who commented, I appreciate each one!!!
Blake, So far most of the sub assemblies can be unbolted or unpinned for when I paint or electroplate.
This car used half shafts with a u-joint at the upright/wheel and a rotoflex coupler at the transmission end.
Some ref. pics....
The rubber 'donut'....
A big thank you to all who commented, I appreciate each one!!!
Blake, So far most of the sub assemblies can be unbolted or unpinned for when I paint or electroplate.
This car used half shafts with a u-joint at the upright/wheel and a rotoflex coupler at the transmission end.
Some ref. pics....
The rubber 'donut'....
-
Topic author - F2 Champion
- Posts: 107
- Joined: Sun Dec 28, 2014 1:51 pm
- Favorite F1 Team or Driver: Gulf
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/14/16 update
Some mockups with the tires.....
Thanks for looking in!!
Randy
-
- F2
- Posts: 54
- Joined: Fri Dec 11, 2015 9:40 pm
- Location: Georgetown, Kentucky, USA
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/18/16 update
This is truly incredible. All those tiny precision parts. Every time I try to hold a small piece with tweezers it takes off across the room and results in a long search of the floor. This really is an amazing project.
-
- FOTA Vice Chairman
- Posts: 1950
- Joined: Wed Dec 19, 2012 4:36 am
- Location: UK
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/18/16 update
I'm loving every bit of this project, Randy...SUPERB!!!
Respect dude!!
Cheers, H
Respect dude!!
Cheers, H
-
- FOTA Chairman
- Posts: 2822
- Joined: Sun Apr 16, 2006 4:18 pm
- Favorite F1 Team or Driver: Niki Lauda, Ronnie Peterson. Only the greats, non of the wankers of today!!
- Location: Anaheim, California
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/18/16 update
Looks great however I'm a little disappointing you are not going to cast the rubber donuts out of flexible resin so that the suspension will work just like every other part of the car you have meticulously made.
Icon Modeler____________________Modeling The Icons Of Motorsports
-
- World Champion
- Posts: 624
- Joined: Thu Jan 09, 2003 3:17 am
- Your Name: Gavin Roberts
- Favorite F1 Team or Driver: Lewis Hamilton
- Location: Norfolk, UK
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/18/16 update
Wow, wow, wow. Mind boggling work.
-
- FOTA Chairman
- Posts: 2249
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: Adventures in soldering: The GT40 project 4/18/16 update
Oh man,only crazy guys here on the board.
Stunning work on the GT40.
regards Christian
Stunning work on the GT40.
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 309 Views
-
Last post by steinietrabi