Nice work Jere!
Your polishing work really works out nicely!
Cheers, Martijn
MFH Ferrari126CK
-
- FOTA Vice Chairman
- Posts: 1950
- Joined: Wed Dec 19, 2012 4:36 am
- Location: UK
- Status: Offline
Re: MFH Ferrari126CK
I knew you wouldn't be able to resistf1fan wrote: This Kit is a good one, but lacks in some areas compared to the real car. So I gathered some reference materials and decided to make it as accurate as possible.
Good stuff, Jere! Will be following this one, for sure!
Cheers, H
-
Topic author - Backmarker
- Posts: 308
- Joined: Sun Jun 26, 2011 11:17 am
- Location: Mesa, AZ USA
- Status: Offline
Re: MFH Ferrari126CK
Hello everyone,
Thank you for the nice comments!
I decided to make more sense out of this thread and redo my picture order. I'm basically working on the fuel system right now. So here is what I have going. I used RB Motion Ferrari fittings and .4 mm MFH fuel line. I had to modify the kit fuel pump slightly with fittings I made from .030 plastic rod. I then drilled a .010 hole in the plastic rod for the wire to attach the fuel line to. On the bottom of the intakes, I took the kit fuel logs and cut them off then flipped them over, drilled holes, inserted stainless tubing and bent some small copper wire to attach the fuel lines to. Pretty tedious work for 1/20 scale, But I think it looks good. So check it out and let me know what you all think.
Cheers, Jere
Thank you for the nice comments!
I decided to make more sense out of this thread and redo my picture order. I'm basically working on the fuel system right now. So here is what I have going. I used RB Motion Ferrari fittings and .4 mm MFH fuel line. I had to modify the kit fuel pump slightly with fittings I made from .030 plastic rod. I then drilled a .010 hole in the plastic rod for the wire to attach the fuel line to. On the bottom of the intakes, I took the kit fuel logs and cut them off then flipped them over, drilled holes, inserted stainless tubing and bent some small copper wire to attach the fuel lines to. Pretty tedious work for 1/20 scale, But I think it looks good. So check it out and let me know what you all think.
Cheers, Jere
- Attachments
-
- fuel pump details 2.jpg (38.79 KiB) Viewed 796 times
-
- fuel pump details.jpg (39.19 KiB) Viewed 796 times
-
- fuel pump lines.jpg (28.06 KiB) Viewed 796 times
-
- fuel lines.jpg (43.08 KiB) Viewed 796 times
-
- fuel injectors.jpg (39.54 KiB) Viewed 796 times
-
Topic author - Backmarker
- Posts: 308
- Joined: Sun Jun 26, 2011 11:17 am
- Location: Mesa, AZ USA
- Status: Offline
Re: MFH Ferrari126CK
Here are a few more pictures of the fuel system. I also revamped the switch panel in the cockpit area with some Hobby Design toggle switches.
Cheers, Jere
Cheers, Jere