2009 Goup Build Starting From The Pits
-
- FOTA Chairman
- Posts: 3361
- Joined: Mon Apr 14, 2003 4:17 pm
- Location: Oxford. UK
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Hi, Looking really good so far,I never used to test build resin kits but it helps to get wing and ride height set before you spray.
Good luck with the rest of the build,Alexp.
Good luck with the rest of the build,Alexp.
Re: 2009 Goup Build Starting From The Pits
Nice looking! and chosing the low wing (never raced) version makes it unique.
But don't you think you should show as also that early JS17?
But don't you think you should show as also that early JS17?
-
Topic author - Backmarker
- Posts: 368
- Joined: Sun Dec 10, 2006 11:13 pm
- Location: Georgetown, TX. Earth. Down the road a piece from COTA
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Just a quick update as to where I'm at on this build. Got most of the painting done today. About ready to decal. Was wet sanding the rear wing end plate over the sink when it slipped out of my hand and went down the garbage disposal. I know better, but hey it's USUALLY quicker to be stupid. Luckily my wife had mentioned that I could use a stick of gum after a morning smooch...so I stuck the gum on the end of a tooth bush and went fishing. Got It! Anyone know if the roll hoop structure was carbon fibre or just painted black?
As requested here are a couple of shots of my JS17. Ever have one of those kits that just click together....this hasn't been one. To start I guess I still had some of the bad batch Alclad as it just would never dry. This kit is also the reason I figured to test build in the future. I'm sure all the fit problems I'm having are operator error and would have been caught during a test build. Silly stuff like the roll hoop being to small by just a smidge so "just push it a little" and ping nice chunk of paint flies off. I have repair the paint but got sidetracked by the Williams and another of Paul Fisher's racing Sea Furys. Will get back to it fairly soon. Cheers, Tim Keily
As requested here are a couple of shots of my JS17. Ever have one of those kits that just click together....this hasn't been one. To start I guess I still had some of the bad batch Alclad as it just would never dry. This kit is also the reason I figured to test build in the future. I'm sure all the fit problems I'm having are operator error and would have been caught during a test build. Silly stuff like the roll hoop being to small by just a smidge so "just push it a little" and ping nice chunk of paint flies off. I have repair the paint but got sidetracked by the Williams and another of Paul Fisher's racing Sea Furys. Will get back to it fairly soon. Cheers, Tim Keily
-
- FOTA Chairman
- Posts: 2817
- Joined: Sun Apr 16, 2006 4:18 pm
- Favorite F1 Team or Driver: Niki Lauda, Ronnie Peterson. Only the greats, non of the wankers of today!!
- Location: Anaheim, California
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Those are both very nice looking machines. I have two of the FW12's just so I could build one with the low wing. I love the way it looks. That JS17 looks very clean. Love your paint work.
Icon Modeler
Icon Modeler
Icon Modeler____________________Modeling The Icons Of Motorsports
-
Topic author - Backmarker
- Posts: 368
- Joined: Sun Dec 10, 2006 11:13 pm
- Location: Georgetown, TX. Earth. Down the road a piece from COTA
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Slow progress with long days at work , but progress none the less. Really struggling with the carbon fibre decals. Strange as doing decals is to me the favorite part of modeling. The decals both Modelers and Scale Motor Sports are very brittle. I'm going to chalk it up to very old sheets and order some fresh ones. I've seen some of you folks make nearly impossible bends with CF decals so it can't be operator error??? The kit decals were a dream to work with. Cheers, Tim Keily
-
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Looks real nice. Like the Focke Wolfe in the background too. BMW engine power.
Lee
Lee
Re: 2009 Goup Build Starting From The Pits
Great! but a little warning: tip of nosecone, currently white under the wing, must be blue also!
Otherwie, this shows good looks
Otherwie, this shows good looks
-
Topic author - Backmarker
- Posts: 368
- Joined: Sun Dec 10, 2006 11:13 pm
- Location: Georgetown, TX. Earth. Down the road a piece from COTA
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Yep, still have a decal for the nose tip, you guys don't miss a thing. The Focke Wulf is actually a Bf-109 so it is McLaren powered..er Daimler Benz. Thanks, Tim
-
- FOTA Chairman
- Posts: 3361
- Joined: Mon Apr 14, 2003 4:17 pm
- Location: Oxford. UK
- Status: Offline
Re: 2009 Goup Build Starting From The Pits
Hi, Both kits look very good and the paint/decal finish is superb. With regard to carbon fibre,on SMS decal I use Microsol only,soak it well and after a couple of minutes dry out with a hairdrier and apply more Microsol if needed.
Regards,alexp.
Regards,alexp.
Re: 2009 Goup Build Starting From The Pits
GGGGGRRRRRRRRRRRrrrrrrrrrrr ................. that Talbot is LOVELY !!!!!!!!!!!!waxdart wrote:Just a quick update as to where I'm at on this build. Got most of the painting done today. About ready to decal. Was wet sanding the rear wing end plate over the sink when it slipped out of my hand and went down the garbage disposal. I know better, but hey it's USUALLY quicker to be stupid. Luckily my wife had mentioned that I could use a stick of gum after a morning smooch...so I stuck the gum on the end of a tooth bush and went fishing. Got It! Anyone know if the roll hoop structure was carbon fibre or just painted black?
As requested here are a couple of shots of my JS17. Ever have one of those kits that just click together....this hasn't been one. To start I guess I still had some of the bad batch Alclad as it just would never dry. This kit is also the reason I figured to test build in the future. I'm sure all the fit problems I'm having are operator error and would have been caught during a test build. Silly stuff like the roll hoop being to small by just a smidge so "just push it a little" and ping nice chunk of paint flies off. I have repair the paint but got sidetracked by the Williams and another of Paul Fisher's racing Sea Furys. Will get back to it fairly soon. Cheers, Tim Keily
Cheers,
-elh-