Model Paint Safety Information
Re: Model Paint Safety Information
I'm gonna give this post a bump since the last post was a year ago. Model building safety should be at the top of everyone's list. Sorry to sound like your mum, but many model paints, solvents and glues are highly toxic, and this thread is a good starting point. For the cost of ONE new MFH kit, you could have a proper spray booth and enjoy EVERY build a bit more. I have a simple booth with good CFM and explosion-proof motor. It means that when I want to airbrush, rattle-can or use oven-cleaner for chrome parts, I just flip a switch. This one addition to your workshop will dramatically speed up everything AND save your health. Happy modeling to all in 2017!
-
- Best of the Rest
- Posts: 598
- Joined: Sat Sep 12, 2015 4:11 pm
- Location: Texas
- Status: Offline
Re: Model Paint Safety Information
Been looking for this thread thanks Hq! I had a question for you all. Due to my current set up, I have to airbrush/rattlecan outdoors. (not ideal at all) A while back I purchased a 3M dual cartridge respirator, and it works decently. However, i'm worried i'm still able to smell the fumes, especially say when i'm spraying Tamiya rattlecans. I've tightened it to my face and gone through the steps, but i'm still able to smell fumes. Am I doing something wrong? Sometime I've over tightened and that didn't help.
And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.
- Ayrton Senna
- Ayrton Senna
Re: Model Paint Safety Information
Normaly it is unpossible to smell nothing of the paint, not even by using a wall paint in house, it is more the question if you breath in too much of it, and how much toxic is inside the smell. to smell it does not ultimately mean your getting hurt by it!
Take a stand!
-
- Top Designer
- Posts: 717
- Joined: Tue Jul 15, 2014 11:14 am
- Status: Offline
Re: Model Paint Safety Information
I use a spray booth! and a mask with particle filtres, both at the same time.
When i sand i always use a medical type mask for avoiding to inhale some resin or plastic dust etc....
It's a must have to everyone as your health is more important than everything!
When i sand i always use a medical type mask for avoiding to inhale some resin or plastic dust etc....
It's a must have to everyone as your health is more important than everything!
Re: Model Paint Safety Information
Basicly you'll be always smelling, same wa that when you spray at home, a late arriving observator will still notice the smell even if dangerous vapours are long gone. Outdoors, with wind in the proper direction, you are well protected. I'd say it's even close to ideal setup...
Re: Model Paint Safety Information
Preludevenom wrote:I use a spray booth! and a mask with particle filtres, both at the same time.
When i sand i always use a medical type mask for avoiding to inhale some resin or plastic dust etc....
It's a must have to everyone as your health is more important than everything!
I`m using a spray booth too at my home, using a 3M Mask with particle filters infront and "Aktivkohlefilter" (how we call it in german) beyond, this sererates the toxic fumes, the same on my job as car painter.
But i have to say, and i`m working now for 23 years in this job, after all i have seen here written down about taking care of healthy, i think i must been dead for lowly 15 years!!
Not much will know about the toxic things that run on in the lately 80`s, or even the early 90`s! If i count all of it that i would be writing from the other side, maybe cloud N°7 or something like this, but not from my desktop!
I said it earlier, with the products actually on the market, with all it`s developement in the past 10 years, you don`t even can buy anywhere something like be used in the 90`s, not to talk about the 80`s!!
So don`t be set aside from yourself in thinking about this! To take care is everytime a good choice, but we are talking about a few minutes, and that not even each day! So what should i talk about when i do my job and use it mainly 8 hours each working day, and that for a decade of more than 20 years???
You will not be hurt so easy, for sure!
Take a stand!
-
- Major Constructor
- Posts: 1067
- Joined: Sun Dec 17, 2006 4:50 am
- Favorite F1 Team or Driver: Tyrrell
- Location: Dresden, Germany
- Status: Offline
Re: Model Paint Safety Information
I only spray outside (just rattle cans). Makes the hobby a bit difficult during winter, during rain, during wind, i.e. no painting on some days. But at least no particles in the air inside the house though the smell will still be there.
Re: Model Paint Safety Information
Agree with James- outdoors with a breeze is kind of what a spray booth is trying to duplicate.JamesB wrote:Basicly you'll be always smelling, same wa that when you spray at home, a late arriving observator will still notice the smell even if dangerous vapours are long gone. Outdoors, with wind in the proper direction, you are well protected. I'd say it's even close to ideal setup...
I live in Minnesota, USA, where it is currently 2 degrees above zero f. It will stay cold until March, pretty much. I can't wait that long between models!
Re: Model Paint Safety Information
have a really much better weather, but the problem is most of us spaniards live in flats, apartments you know!! no backyards!!!hquednau wrote: I live in Minnesota, USA, where it is currently 2 degrees above zero f. It will stay cold until March, pretty much. I can't wait that long between models!
-
- Major Constructor
- Posts: 1060
- Joined: Fri Mar 18, 2011 2:31 pm
- Location: New Hampshire - USA
- Status: Offline
Re: Model Paint Safety Information
I also use the 3M dual cartridge respirator and I recently bought a new set of cartridges to replace the older ones. I do it once a year. Those things have expiration date and you can see and smell when it's time to replace them.mobiusone wrote:Been looking for this thread thanks Hq! I had a question for you all. Due to my current set up, I have to airbrush/rattlecan outdoors. (not ideal at all) A while back I purchased a 3M dual cartridge respirator, and it works decently. However, i'm worried i'm still able to smell the fumes, especially say when i'm spraying Tamiya rattlecans. I've tightened it to my face and gone through the steps, but i'm still able to smell fumes. Am I doing something wrong? Sometime I've over tightened and that didn't help.
Maybe it's time for you to replace yours.
Regards,
Starr
Classic Plastic Model Club - Lowell, MA