Arrows A11b 1/20
-
Topic author - F2
- Posts: 54
- Joined: Tue Apr 19, 2016 10:15 pm
- Your Name: Jeff_G
- Favorite F1 Team or Driver: Benetton F1
- Status: Offline
Arrows A11b 1/20
All wrapped up with a bow on it!
This is my Arrows A11b, 1990 French GP, driven by the late, great Michele Alboreto.
The kit was purchased off of Yahoo Japan using Buyee. When I received it, the only usable part was the body. The other parts were too crude for use or badly warped.
My 3d printer was used for the entire undertray and diffuser, front wing, radiator sidepod inlets, top airscoop, and dash. Much sanding and filling was needed to refine the shape, and I think it looks ok.
Suspension is largely from Tamiya's FW13b. I am most happy with the work needed to get the car to sit right.
Paint is Zero brilliant white, and a mix of Mission and Vallejo for the rest. Decals are Studio 27.
This is the 4th car in my long term project, which is representing the 1990 French GP, which I believe was one of the most extraordinary and exciting races in F1 history. I am only doing one car from each team. I am saving the Ferrari, Leyton House, and Bennetton until last and my skills improve. Next up will most likely be a back marker.
This is my Arrows A11b, 1990 French GP, driven by the late, great Michele Alboreto.
The kit was purchased off of Yahoo Japan using Buyee. When I received it, the only usable part was the body. The other parts were too crude for use or badly warped.
My 3d printer was used for the entire undertray and diffuser, front wing, radiator sidepod inlets, top airscoop, and dash. Much sanding and filling was needed to refine the shape, and I think it looks ok.
Suspension is largely from Tamiya's FW13b. I am most happy with the work needed to get the car to sit right.
Paint is Zero brilliant white, and a mix of Mission and Vallejo for the rest. Decals are Studio 27.
This is the 4th car in my long term project, which is representing the 1990 French GP, which I believe was one of the most extraordinary and exciting races in F1 history. I am only doing one car from each team. I am saving the Ferrari, Leyton House, and Bennetton until last and my skills improve. Next up will most likely be a back marker.
-
- FOTA Chairman
- Posts: 4438
- Joined: Wed Dec 21, 2005 3:20 pm
- Favorite F1 Team or Driver: Stake Sauber
- Location: Oulu-Uleåborg Finland
- Status: Offline
Re: Arrows A11b 1/20
Very nice indeed . These futuristic Builds with using 3D Printer for "cloning" Parts are very interesting, only here in F-land 3D Printer costs as much as decent Laptop Computer still.
My completed Models:
https://www.flickr.com/photos/150229040 ... 3349714787
https://www.flickr.com/photos/150229040 ... 3349714787
-
- Constructors Champion
- Posts: 1481
- Joined: Sat Dec 21, 2002 11:36 am
- Favorite F1 Team or Driver: Stewart Grand Prix
- Location: Charlotte, NC
- Status: Offline
Re: Arrows A11b 1/20
Looks great! Nice clean build and you can't really tell how mixed of a kit it is either!
-
- Team Owner
- Posts: 841
- Joined: Tue Dec 06, 2005 6:13 pm
- Location: Feudingen, Germany
- Status: Offline
Re: Arrows A11b 1/20
It turned out fantastic. Amazing if you consider the quality of the kit you have started with.
I don't think you have to worry about your skills.
I wonder how the red color looks compared with the McLaren?
On the last picture it almost seems to be pink compared with the McLaren in the background.
So, a backmarker next.
Are you also going to build non-qualifiers? In that case there are four cars coming to my mind. Otherwise there would be only the Brabham.
I don't think you have to worry about your skills.
I wonder how the red color looks compared with the McLaren?
On the last picture it almost seems to be pink compared with the McLaren in the background.
So, a backmarker next.
Are you also going to build non-qualifiers? In that case there are four cars coming to my mind. Otherwise there would be only the Brabham.
-
- FOTA Chairman
- Posts: 4540
- Joined: Sun Jun 24, 2007 11:39 am
- Favorite F1 Team or Driver: Riccardo Patrese
- Location: Hull, England.
- Status: Offline
Re: Arrows A11b 1/20
Very nice, such a pleasure to see a build as good as this of a back marker. Which kit do you have for the Benetton? I'm currently building the B190 myself.
-
Topic author - F2
- Posts: 54
- Joined: Tue Apr 19, 2016 10:15 pm
- Your Name: Jeff_G
- Favorite F1 Team or Driver: Benetton F1
- Status: Offline
Re: Arrows A11b 1/20
Thanks for the comments!
I should have said non-qualifier rather than back marker, as this next project never was on anyone's back! The Life L190!!!
My printer is very basic ($200 USD) and I still have to use good old fashioned modeling techniques to incorporate the parts I make. It's amazing to think how this technology will improve in the future.vekkuli wrote:These futuristic Builds with using 3D Printer for "cloning" Parts are very interesting, only here in F-land 3D Printer costs as much as decent Laptop Computer still.
I have the AMD kit, but was very lucky to get a set of AMC decals with it, as they look very nice.daveyman wrote:Which kit do you have for the Benetton? I'm currently building the B190 myself.
I used Zero on the McLaren too, and that is very florescent. The Arrows decals are more reddish, and in proper light look good to my eye.Steffen_T wrote:I wonder how the red color looks compared with the McLaren?
On the last picture it almost seems to be pink compared with the McLaren in the background.
So, a backmarker next.
Are you also going to build non-qualifiers? In that case there are four cars coming to my mind. Otherwise there would be only the Brabham.
I should have said non-qualifier rather than back marker, as this next project never was on anyone's back! The Life L190!!!
-
- FOTA Chairman
- Posts: 4540
- Joined: Sun Jun 24, 2007 11:39 am
- Favorite F1 Team or Driver: Riccardo Patrese
- Location: Hull, England.
- Status: Offline
Re: Arrows A11b 1/20
Thanks, I'm making the AMD kit too.
I'll put a brief WIP up here when I've made enough progress to warrant it.
I'll put a brief WIP up here when I've made enough progress to warrant it.
-
- Backmarker
- Posts: 305
- Joined: Tue Jul 05, 2016 5:04 am
- Your Name: Tyrone
- Favorite F1 Team or Driver: James Hunt
- Location: United Kingdom
- Contact:
- Status: Offline
Re: Arrows A11b 1/20
Is this printed with a traditional 3D printer or SLA / resin? Very impressive!! I'm loving 3D printing stuff myself
-
- F1 Test Driver
- Posts: 203
- Joined: Tue Jun 05, 2018 10:53 am
- Your Name: Donovan
- Favorite F1 Team or Driver: Ferrari
- Location: United States
- Status: Offline
Re: Arrows A11b 1/20
Very nice, great job!
Re: Arrows A11b 1/20
Thats a nice addition to a beautifully looking set of cars. Hope you can get yourself a 1990 Brabham....that was one pretty (if fairly useless) car.