Tyrrell P34, Tamiya 1/12
-
Topic author - FOTA Vice Chairman
- Posts: 1611
- Joined: Fri Apr 27, 2007 2:10 pm
- Favorite F1 Team or Driver: HHF
- Location: Germany
- Contact:
- Status: Offline
Today I did the rear suspension and exhaust. Then I started airbrushing the first body parts, I used Aquacolor Blue 52 mixed with a bit of white, then Mr. Hobby Clearcoat.
Marco
My Gallery: http://www.marcosaupe.de/modelle.html
My Gallery: http://www.marcosaupe.de/modelle.html
-
Topic author - FOTA Vice Chairman
- Posts: 1611
- Joined: Fri Apr 27, 2007 2:10 pm
- Favorite F1 Team or Driver: HHF
- Location: Germany
- Contact:
- Status: Offline
Don't know if anyone is still interested but I married chassis and engine and added more wiring. The rollbar was painted with Tamiya Paintmarker, the oiltank(?) airbrushed with Aqua Color silver, wasn't sure which one is best, but both work
Marco
My Gallery: http://www.marcosaupe.de/modelle.html
My Gallery: http://www.marcosaupe.de/modelle.html
-
- Top Designer
- Posts: 757
- Joined: Sat Nov 27, 2004 7:20 pm
- Location: Brisbane, Australia
- Status: Offline
-
Topic author - FOTA Vice Chairman
- Posts: 1611
- Joined: Fri Apr 27, 2007 2:10 pm
- Favorite F1 Team or Driver: HHF
- Location: Germany
- Contact:
- Status: Offline
This weekend it was time for painting the body and putting on the decals. Indycal decals are very thin, so one has to be careful, but the colours are much better than the original. Clear is still missing, will be done this evening.
Marco
My Gallery: http://www.marcosaupe.de/modelle.html
My Gallery: http://www.marcosaupe.de/modelle.html
-
Topic author - FOTA Vice Chairman
- Posts: 1611
- Joined: Fri Apr 27, 2007 2:10 pm
- Favorite F1 Team or Driver: HHF
- Location: Germany
- Contact:
- Status: Offline
Thx all
The aluminium was sprayed straight on the plastic, the blue was primed before.
The aluminium was sprayed straight on the plastic, the blue was primed before.
Marco
My Gallery: http://www.marcosaupe.de/modelle.html
My Gallery: http://www.marcosaupe.de/modelle.html
-
Topic author - FOTA Vice Chairman
- Posts: 1611
- Joined: Fri Apr 27, 2007 2:10 pm
- Favorite F1 Team or Driver: HHF
- Location: Germany
- Contact:
- Status: Offline
So, it's finished
There were no belts in the kit, but in the 312T4 i built were normal and etched belt parts, and as i used the normal parts there I had a set of etched belts to use here.
Then i mounted the radiators and the rear wing.
Finally finished, now I need good weather for some gallery pictures.
Thanks for watching.
There were no belts in the kit, but in the 312T4 i built were normal and etched belt parts, and as i used the normal parts there I had a set of etched belts to use here.
Then i mounted the radiators and the rear wing.
Finally finished, now I need good weather for some gallery pictures.
Thanks for watching.
Marco
My Gallery: http://www.marcosaupe.de/modelle.html
My Gallery: http://www.marcosaupe.de/modelle.html