Hey guys-
Anyone have any good advice on how to distill hardened super glue? I filled in a spot on my f2001b that i need to flush out (change of heart on which race wing I want). What kind of solvent would do the trick?
Thanks for any help you may have
De-glueing super glue
-
Topic author - F2
- Posts: 66
- Joined: Fri Jan 02, 2004 8:43 pm
- Status: Offline
RE: De-glueing super glue
Why not drilling it again?
Anyway, there's a super glue stain remover in the shops, this might help...
Anyway, there's a super glue stain remover in the shops, this might help...
-
Topic author - F2
- Posts: 66
- Joined: Fri Jan 02, 2004 8:43 pm
- Status: Offline
RE: De-glueing super glue
its the impression tamiya molded into the side wing (the vertical wing).
RE: De-glueing super glue
Why not drilling it again?
Anyway, there's a super glue stain remover in the shops, this might help...
Anyway, there's a super glue stain remover in the shops, this might help...
-
- Constructors Champion
- Posts: 1415
- Joined: Thu Feb 20, 2003 3:27 pm
- Favorite F1 Team or Driver: Team Lotus
- Location: Boise, Idaho Go Broncos!
- Status: Offline
RE: De-glueing super glue
Try one of the debonders put out by the glue makers. The ones that I have tried don't harm plastic. My favorite is Z-7 brand. Put a couple of drops on a cotten swab and rub it off.
Paul Erlendson
Paul Erlendson
-
- F1 Test Driver
- Posts: 286
- Joined: Tue Dec 30, 2003 12:45 pm
- Location: nr. Milton Keynes, UK
- Contact:
- Status: Offline
RE: De-glueing super glue
I'd second Zap Z-7, you should always buy a debonder if you are going to use super glue.
.....and keep it within reach !
.....and keep it within reach !
-
- FOTA Chairman
- Posts: 2409
- Joined: Sat Jan 26, 2002 5:27 pm
- Favorite F1 Team or Driver: Chapmans Lotus, James Hunt
- Location: Anza ca.
- Status: Offline
RE: De-glueing super glue
Nail poilish remoner has acetone it.This could damage the plastic.
But I do use acetone to remove super glue & epoxy from metal & ecthed parts.
But I do use acetone to remove super glue & epoxy from metal & ecthed parts.