Page 2 of 2

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Tue Mar 05, 2019 11:02 am
by shood23
Some good progress to the SF71H build recently.

The floor parts from smirkoff have been added. I did have to add a little plastic packer due to my cuts not being straight other than that they fit perfect.
Image

A little super glue to fill the join line and its ready for primer.
Image

On to the body and it was flatted back and white primer applied.
Image

After this the white primer was sanded back lightly to knock off the high spots and a few layers of zero paints Sf70 red applied.
Image

A little 2k gloss was added soon after.
Image

And finally the decals have been started.
Image

More to come very soon

Shaun

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Tue Mar 05, 2019 12:24 pm
by CTurbert
Great work so far! The 3D printed parts have been very cleanly integrated with the Tamiya parts. Will be keeping an eye on this thread.

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Tue Mar 05, 2019 5:35 pm
by CelicaGT
Wow, this looks amazing, can't wait to see the finished product. Just wondering, was the white primer applied over the silver color? Will some silver be revealed later?

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Thu Mar 07, 2019 8:27 am
by shood23
CelicaGT wrote:Wow, this looks amazing, can't wait to see the finished product. Just wondering, was the white primer applied over the silver color? Will some silver be revealed later?

No. I have to strip the body again as the silver really threw of the shade of red. I will be updating the thread later today to show where i am currently as alot has changed.

Shaun

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Sat Mar 09, 2019 1:27 pm
by shood23
So let's have a nice Saturday update.

Over the last week or so the car has changed massively so at a starting point alot of the extra 3d parts for the barge boards and such have been sprayed with primer after a quick wash. (One note due to the thickness of these parts use only a cold warm water to wash)

Starting off the halo. It's one of the thickest parts so no worries with it.
Image

The massively complex barge boards.
Image

The side pod areas need some work due to the layering effect but nothing too bad.
Image

The rear suspension parts. Note that i only noticed smirkoff on the sprue after primer.
Image

The floor part i wasn't 100% happy with. It needs a little filling.
Image

Body decals are close to being complete.
Image

The under side has had carbon decals added. Also the under body fins have been changed.
Image

Almost complete. Super happy with the result so far. Decals from kmp have been perfect, mission winnow decals from grand prix decals have been more or less perfect apart from my errors but they are being amazing and hopefully very soon I will have replacements for the ones I messed up. And obviously all the 3d parts have up to this point been great.
Image

Comparing it to the 2017 car naturally the changes are not huge as its the same kit but they are big enough not to 100%say it's the same kit.
Image

More soon

Shaun

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Sat Mar 09, 2019 7:11 pm
by Jeff
Looks excellent Shaun, really coming together now

Re: Ferrari SF71H conversion from Ferrari SF70H.

Posted: Sun Mar 10, 2019 5:15 am
by gp-models
Nice paint job on both models!