Lancia Delta S4 M@r!b*r* – Beemax 1/24

Models in progress... including non-F1 models.
Post Reply
User avatar

SteveNoble
FOTA Chairman
FOTA Chairman
Posts: 2271
Joined: Sun Jul 30, 2006 4:27 pm
Location: Barnsley, UK
Status: Offline

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by SteveNoble »

Excellent work!! The carbon and kevlar textures look fantastic. I'm looking forward to seeing the seats painted blue..
Steve Noble
User avatar

Steffen_T
Team Owner
Team Owner
Posts: 836
Joined: Tue Dec 06, 2005 6:13 pm
Location: Feudingen, Germany
Status: Offline

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by Steffen_T »

The magic continues! Amazing work with those CF-decals. I always hate to do this stuff!

Thank you for posting your progress! :D
User avatar

Topic author
JesusM
Backmarker
Backmarker
Posts: 341
Joined: Thu Oct 28, 2010 4:24 am
Favorite F1 Team or Driver: Ferrari, Tyrrell
Location: Madrid - Spain
Contact:
Status: Offline
Spain

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by JesusM »

SteveNoble wrote:Excellent work!! The carbon and kevlar textures look fantastic. I'm looking forward to seeing the seats painted blue..
Thanks Steve, happy you like it!
The seats blue will be the new paint for seats from Zero!!
User avatar

Topic author
JesusM
Backmarker
Backmarker
Posts: 341
Joined: Thu Oct 28, 2010 4:24 am
Favorite F1 Team or Driver: Ferrari, Tyrrell
Location: Madrid - Spain
Contact:
Status: Offline
Spain

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by JesusM »

Steffen_T wrote:The magic continues! Amazing work with those CF-decals. I always hate to do this stuff!

Thank you for posting your progress! :D
I agree with you: decals process is always something expected but it is bored at the end!
But if tou persists, the work is fine!
Thanks for comenting

parklaneworks
Backmarker
Backmarker
Posts: 343
Joined: Fri Jul 23, 2010 8:23 am
Favorite F1 Team or Driver: Ferrari, Lotus, Brabham
Location: Rotterdam, Netherlands
Status: Offline
Netherlands

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by parklaneworks »

Great progress! The CF decals make it look fantastic! I received the KMP detail-up parts last week and indeed they look very good and have an excellent quality!
User avatar

Shunter
FOTA Chairman
FOTA Chairman
Posts: 2883
Joined: Sat Sep 20, 2003 12:38 am
Favorite F1 Team or Driver: Alfa Romeo, McLaren, Williams
Location: Melbourne, Australia
Contact:
Status: Offline
Australia

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by Shunter »

Stunning work...
User avatar

Topic author
JesusM
Backmarker
Backmarker
Posts: 341
Joined: Thu Oct 28, 2010 4:24 am
Favorite F1 Team or Driver: Ferrari, Tyrrell
Location: Madrid - Spain
Contact:
Status: Offline
Spain

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by JesusM »

parklaneworks wrote:Great progress! The CF decals make it look fantastic! I received the KMP detail-up parts last week and indeed they look very good and have an excellent quality!
Yes, KMP did a very good job!
Thanks for your coments!
User avatar

Topic author
JesusM
Backmarker
Backmarker
Posts: 341
Joined: Thu Oct 28, 2010 4:24 am
Favorite F1 Team or Driver: Ferrari, Tyrrell
Location: Madrid - Spain
Contact:
Status: Offline
Spain

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by JesusM »

Shunter wrote:Stunning work...
:D :D
User avatar

Topic author
JesusM
Backmarker
Backmarker
Posts: 341
Joined: Thu Oct 28, 2010 4:24 am
Favorite F1 Team or Driver: Ferrari, Tyrrell
Location: Madrid - Spain
Contact:
Status: Offline
Spain

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by JesusM »

Continuamos con el Delta S4 y piezas diversas que voy modificando o rehaciendo para mejorar su detalle.

Vamos con los neumáticos. Después de su imprimación, los pinto con el Negro de Zero para las ruedas. Su acabado es muy bueno como podéis comprobar!!

We continue with the Delta S4 and various pieces that I am modifying or redoing to improve its detail.

We go with the tires. After priming, I paint them with Zero Black for the wheels. Its finish is very good as you can see!

Image

Image

Una vez seco, le ponemos la calca de Pirelli con la ayuda de los productos MIcro y el secador:

Once dry, we put the decal of Pirelli with the help of the MIcro products and the dryer:

Image

Y si colocamos las llantas, este es el resultado:

And if we place the tires, this is the result:

Image

Pasamos al radiador delantero, al que le vamos a añadir los fotograbados de Beemax y de HD. Pero para ello, debemos primero rebajar el ventilador existente de la pieza…

We go to the front radiator, to which we are going to add the photoetches of Beemax and HD. But for this, we must first lower the existing fan of the piece …

Image

…. Y ese filtro de la parte trasera. En su lugar irá el filtro de KMP:

…. And that filter from the back. In its place will go the KMP filter:

Image

Para ello, utilizamos la fresadora de Proxxon:

For this, we use the Proxxon milling machine:

Image

Y este es el resultado del radiador con la rejilla y ventilador de Beemax, ya pintados:

And this is the result of the radiator with the grid and fan of Beemax, already painted:

Image

Pero como tengo algunas piezas de recambio, rehago otro radiador con los fotograbados de HD, más completos:

But since I have some spare parts, I redo another radiator with the most complete HD photoetches:

Image

Y aquí el resultado en su parte delantera, ya ensuciado y sin cablear:

And here the result in its front, already dirty and without wiring:

Image

Mientras tanto, en su parte trasera, vemos colocados sin pegar, los tubos realizados con redondo de evergreen y doblados con el calor de un soldador, y el filtro de KMP, ya pintado. Proximamente pondré más información de esta pieza con más detalles aplicados:

Meanwhile, in its back, we see placed without sticking, the tubes made with evergreen round and folded with the heat of a welder, and the KMP filter, already painted. Soon I will put more information of this piece with more details applied:

Image

Pasamos a una pieza de KMP, hecha en 3D que se pondrá dentro del portón trasero y que canaliza el aire de las entradas laterales hacia los dos grandes radiadores del motor. Para afinarla, la lijo y relleno con este putty nuevo que se disuelve con agua y que su acabado es muy similar a la verde de Stuco. La aplicamos por casi todos lados:

We pass a piece of KMP, made in 3D that will be placed inside the tailgate and that channels the air from the side inlets to the two large radiators of the engine. To refine it, sand it and fill it with this new putty that dissolves with water and that its finish is very similar to Stuco’s green. We apply it almost everywhere:

Image

Después lijamos, imprimamos y pintamos con begro brillante de Zero, para aplicar calcas de Kevlar a todo el conjunto:

Then we sand, print and paint with bright begro de Zero, to apply Kevlar decals to the whole set:

Image

Para ello, ponemos cinta de enmascarar por partes, la recortamos y ponemos en hoja de calca:

To do this, we put masking tape in parts, cut it and put on a decal sheet:

Image

Las cortaremos y aplicaremos por partes con los productos micro y secador de pelo…poco a poco:

We will cut them and apply parts with micro products and hair dryer … little by little:

Image

Otra vista de la pieza con más calcas aplicadas…

Another view of the piece with more applied decals …

Image

Y ya está terminado!!

And it’s over!

Image

Esta es la posición del mismo en el portón trasero. Decir que irá ensuciado posteriormente tal y como aparece en las fotos del coche real:

This is its position in the tailgate. Say that it will go dirty later as it appears in the photos of the real car:

Image

Pasamos a la pieza superior del salpicadero. Ha sido pintado con la pintura texturizada de Zero, una vez le redondeé el borde exitente encima del salpicadero. También le puse los cuatro remaches existentes en lso modelos reales:

We pass to the upper part of the dashboard. It has been painted with Zero’s textured paint, once I rounded the exciting edge above the dashboard. I also put the four existing rivets on the real models:

Image

Más piezas de KMP que he imprimado y pintado: los tres filtros con negro semimate y los botes en aluminio, ambos de Zero. Posteriomente les pintaré las conexiones con azul y rojo metálicos:

More pieces of KMP that I have printed and painted: the three filters with semi-black black and the aluminum boats, both from Zero. Later I will paint the connections with metallic blue and red:

Image

Aquí vemos de nuevo la pieza de los filtros junto al turbo. Ambos pintados con aluminio Metal de Zero:

Here we see again the piece of filters next to the turbo. Both painted with Zero Metal aluminum:

Image

Si bien hemos visto unos tubos en el radiador delantero, más o menos acabados, aquí or muestro el proceso. Los tubos doblados y pegados, con masilla en las uniones. Destacar que las uniones tienen un alambre dentro para asegurarlas así como en los extremos que van acoplados al filtro. Dichos alambres irán metidos en dos piezas que he añadido al filtro con su correspondiente agujerito:

While we have seen some tubes in the front radiator, more or less finished, here I show the process. The tubes bent and glued, with putty in the joints. Note that the joints have a wire inside to secure them as well as at the ends that are attached to the filter. These wires will go into two pieces that I have added to the filter with its corresponding hole:

Image

Aquí está esa pieza lijada, imprimada y pintada con aluminio metal de Zero. Le acompaña las piezas de KMP que van encima de las bujias (KMP nos da 8 piezas para asegurar que alguna se nos rompa) y que he pintado con rojo Brabham de Zero, que se parece mucho al color original:

Here is that piece sanded, primed and painted with aluminum metal from Zero. It accompanies the pieces of KMP that go over the spark plugs (KMP gives us 8 pieces to ensure that some of them are broken) and that I have painted with Zero Brabham red, which closely resembles the original color:

Image

Más piezas: las bombas de los frenos y la pieza donde van. Hechas de plástico a scratch e imprimadas con Gravity:

More parts: the brake pumps and the part where they go. Made of scratch in plastic and primed with Gravity:

Image

Pasamos a los triangulos traseros de la suspensión. COmo véis, las fijaciones de la pieza no se asemejan nada a la realidad, por lo que las voy a rehacer. Lo primero, maco las medidas en el metal de los diskettes, y hago los taladros….

We pass to the rear triangles of the suspension. As you can see, the fixings of the piece do not resemble anything to reality, so I will redo them. First, I make the measurements on the metal of the diskettes, and do the drills ….

Image

A su vez, tapo los agujeros por los que pasaremos la pieza original, por la parte de atrás. Podeis ver también que he agujereado donde van los remaches de las dos piezas grandes:

In turn, I plug the holes through which we will pass the original piece, through the back. You can also see that I have drilled where the rivets of the two large pieces go:

Image

Una vez cortadas y dobladas las piezas de metal, le elimino las esquinas con limas. Estas piezas, las pegaré en los paneles correspondientes. Y como ya no me servirán estas piezas en los triangulos, las eliminaré con cuidado dejando el perno que se introducirá en su lugar:

Once the metal pieces have been cut and folded, I remove the corners with files. I will glue these pieces to the corresponding panels. And since these pieces will no longer serve me in the triangles, I will remove them carefully leaving the bolt that will be inserted in its place:

Image

Aquí tenemos las piezas pintadas con aliminio Metal de Zero:

Here we have the pieces painted with Zero Metal aluminum:

Image

A dichas piezas, les puse calca de Kevlar y aquí las pongo sin pegar para ver el resultado. Aun faltan muchos detalles!!

To these pieces, I put Kevlar decal and here I put them without pasting to see the result. There are still many details missing!

Image

Otras piezas que es conveniente detallar son los amortiguadores, en este caso los delanteros. Podeis ver el original en la parte superior, y debajo, el modificado sin pegar. Abajo veis todas las piezas, una vez he cortado el muelle original dejando los extremos para utilizarlos, dos tubos e metal para el interior del muelle, y el propio muelle hecho de alambre:

Other parts that are convenient to detail are the shock absorbers, in this case the front ones. You can see the original at the top, and below, the modified one without pasting. Below you see all the pieces, once I have cut the original spring leaving the ends to use them, two tubes and metal for the interior of the spring, and the spring itself made of wire:

Image

Pegamos los tubos de metal a la parte inferior del amortiguador, imprimamos y pintamos:

We glue the metal tubes to the bottom of the shock absorber, print and paint:

Image

Más piezas: palanca de cambios, brazo de dirección y los ejes de las ruedas traseras:

More parts: gear lever, steering arm and rear wheel axles:

Image

Aquí vemos la pieza de las bombas de freno pintada de color marrón parecido al Kevlar y los muelles, de blanco:

Here we see the part of the brown painted brake pumps similar to Kevlar and the springs, in white:

Image

Más piezas modificadas: esta pieza sujeta la estructura del motor con el cortafuegos trasero. Le he colocado unas pletinas de metal y tuercas, todo imprimado con Gravity y pintado con aluminio Metal de Zero:

More modified parts: this piece holds the engine structure with the rear firewall. I have placed some metal plates and nuts, all primed with Gravity and painted with Metal Zero aluminum:

Image

En este caso, la pintura es el Metal Cromo de Zero, y las piezas son el deposito de aceite de KMP, el freno de mano y el repartidos de frenada que he renecho con un tubo y una arandela:

In this case, the paint is Zero Chrome Metal, and the pieces are the KMP oil reservoir, the handbrake and the brake distribution I have renewed with a tube and a washer:

Image

Seguimos con la pintura de piezas en negro semi mate de Zero, para su posterior montaje o detallado: volante, salpicadero, bateria de KMP, y triángulos de suspension traseros:

We continue with the painting of pieces in semi-matt black from Zero, for later assembly or detailed: steering wheel, dashboard, KMP battery, and rear suspension triangles:

Image

Los paneles de las puertas, pintados de negro semi mate de Zero:

The door panels, painted in semi-matt black from Zero:

Image

Y con calca de Kevlar aplicada, recortada por mi. Falta un sombreado de la misma…

And with applied Kevlar decal, trimmed by me. Missing a shading of it …

Image

Aquí vemos muchas piezas ya casi terminadas, y pintadas:

Here we see many pieces already almost finished, and painted:

Image

Y para terminar, los dos test de las pinturas de Zero para los asientos. Es necesario un aero 0.6 para que pueda salir la textura. Aun así tengo que hacer alguna prueba más:

And finally, the two tests of Zero’s paintings for the seats. A 0.6 aero is necessary for the texture to come out. Even so, I have to do some more test:

Image

Gracias por ver y comentar!!
User avatar

Topic author
JesusM
Backmarker
Backmarker
Posts: 341
Joined: Thu Oct 28, 2010 4:24 am
Favorite F1 Team or Driver: Ferrari, Tyrrell
Location: Madrid - Spain
Contact:
Status: Offline
Spain

Re: Lancia Delta S4 M@r!b*r* – Beemax 1/24

Post by JesusM »

Hola a todos de nuevo. Sigo trabajando en el Delta S4 con muchos detalles extras, ya que el kit lo agradece!. Y esta es una de las últimas imágenes hechas para ver como quedan los asientos:

Hi again, everybody. I’m still working on the Delta S4 with many extra details, since the kit allows you! And this is one of the last images made to see how the seats look:

Image

Y vamos con ellos: viendo los test de la pinturas texturizadas de Zero en colores rojo y azul, decidí aplicar un color base para que cubriese mejor. Y así lo hice: aquí tenéis la capa base….

And we go with them: seeing the tests of Zero’s textured paints in red and blue colors, I decided to apply a base color to cover it better. And so I did it: here you have the base layer …

Image

…y aquí con la pintura texturizada. Ahora si que puedo pintar lso asientos!!

… and here with textured paint. Now I can paint the seats!

Image

Para ello, aplico masking de Micro sobre el kevlar de los asientos..

To do this, I apply Micro masking on the seat kevlar ..

Image

Pintamos la base azul…

We paint the blue base …

Image

Y aquí la pintura texturizada con boquilla de 0,6 en el aerógrafo…

And here it is with the textured paint with 0.6 nozzle on the airbrush …

Image

Aquí vemos como queda en el cockpit!!

Here we see how it looks in the cockpit!

Image

Y para darle un poco más de profundidad o desgaste, aplico pincel seco con azul claro. Vemos la diferencia en el asiento de la izquierda:

And to give it a little more depth or wear, I apply dry brush with light blue. We see the difference in the left seat:

Image

Pasamos a otra pieza que he aplicado pintura texturizada, pero en este caso de color negro: son las piezas donde van alojadas las ruedas traseras, pero que van fijadas al portón trasero:

We move to another piece that I have also applied textured paint, but in this case of black color: they are the pieces where the rear wheels are housed, but they are fixed to the tailgate:

Image

Y de aquí, por proximidad, nos vamos con la transmisión. Es una pieza que teoricamente no se verá por tener el carter tapado por una calva de kevlar. Pero ya que lo voy a detallar un poco, eliminaré parte de esa calca y al ser transparente la pieza, se verá. Una vez pintada la pieza con Metal Aluminium de Zero, le doy unos lavados con humo para añadir profundidad. Además, le añado dos piezas de cobre, un redondo y un angulo. Ahí es donde iría la base de la palanca de cambios:

And from here, by proximity, we move with the transmission. It is a piece that theoretically will not be seen having the carter covered by a bald kevlar. But since I’m going to detail it a bit, I will remove part of that decal and we will look it being transparent the piece. Once the piece is painted with Zero Aluminum Metal, I give it some smoke washes to add depth. In addition, I add two pieces of copper, a round and an angle. That’s where the base of the gearshift would go:

Image

Image

A su vez, le añado dos latiguillos con us conectores en rojo y azul, dos tuberías que son los conductos del aceite del motor al radiador delantero. y que pasan por ese lugar:

In turn, I add two hoses with us connectors in red and blue, two pipes that are the conduits of the engine oil to the front radiator. and that pass through that place:

Image

Si lo colocamos en su lugar, este sería su aspecto:

If we put it in its place, this would be its appearance:

Image

Podemos ver también la barra negra de transmisión en el medio:

We can also see the black transmission bar in the middle:

Image

Finalmente, sombreamos la zona con colores Alclad sobre el Aluminio:

Finally, we shade the area with Alclad colors on Aluminum:

Image

Ahora le vamos a dar la vuelta a esta pieza del habitáculo:

Now we are going to turn this piece of the cabin around:

Image

La imprimamos con Gravity junto con la base del coche:

We prime it with Gravity along with the base of the car:

Image

Y las pintamos con Metal Aluminium de Zero:

And we paint them with Zero Aluminum Metal:

Image

Image

Si juntamos las dos piezas, este es su aspecto en su parte inferior:

If we put the two pieces together, this is their appearance at the bottom:

Image

Como vamos a aplicar Kevlar en todo el cockpit, le damos una base con el color de Zero, habiendo enmascarado el resto:

As we are going to apply Kevlar throughout the cockpit, we give it a base with the color of Zero, having masked the rest:

Image

Y aquí el resultado:

And this is the result:

Image

Pintamos también, los triángulos de la suspensión trasera de negro semi mate de Zero, habiendo enmascarado todo previamente. En la foto, aparecen las piezas del cockpit y chasis superpuestas:

We also painted, the triangles of the rear suspension of semi-matt black from Zero, having masked everything previously. In the photo, the superimposed cockpit and chassis parts appear:

Image

En la siguiente foto, vemos la parte delantera de ambas piezas, con el fondo negro del frontal pintado con semi mate de Zero, habiendo enmascarado las piezas metálicas.

In the following photo, we see the front of both pieces, with the black background of the front painted with semi-matt from Zero, having masked the metal parts.

Image

Y pasamos al proceso de creación de las calcas de Kevlar. Primero vamos poniendo cinta de enmascarar y las cortamos directamente con el cutter. Observamos el corte ya realizado en la base izquierda de la cinta:

And we move on to the process of creating the Kevlar decals. First we put masking tape and cut them directly with the cutter. We observe the cut already made on the left base of the tape:

Image

…y las ponemos en la hoja de calcas, listas para cortarse y aplicar:

… and we put them on the decal sheet, ready to cut and apply:

Image

Este es el resultado. Comentar que he recortado las calcas un poco más grandes para que solapen unas con otras, tal y como ocurre en realidad:

This is the result. I can say that I have cut the decals a little bigger so that they overlap with each other, just as it actually happens:

Image

Notad la calca original del kit más amarilla…que más adelante sustituiré!

Notice the original decal of the yellowest kit … which I will replace later!

Image

Seguimos con esta pieza. Vemos que las fotos no llevan una cronología exacta, y es debido a que las he colocado en diferente orden para explicar procesos más o menos completos. Por eso, vemos en la siguiente que no hay ninguna calca de Kevlar puesta, ya que estaba con pruebas del radiador delantero. En la foto vemos las piezas base del kit sobre las que detallaremos:

We continue with this piece. We see that the photos do not have an exact chronology, and it is because I have placed them in different order to explain more or less, the complete processes. Therefore, we see in the following that there is no Kevlar decal on, since I was with tests of the front radiator. In the photo we see the base pieces of the kit on which we will detail:

Image

En el anterior post, dejamos los tubos del radiador pintados con Metal Aluminium de Zero. Ahora véis la pieza con las juntas hechas con cinta de enmascarar pintadas de negro semimate, y sus fijaciones, con cinta autoadhesiva metálica:

In the previous post, we left the radiator tubes painted with Zero Aluminum Metal. Now you see the piece with the joints made with masking tape painted in semi-black, and its fixings, with metallic self-adhesive tape:

Image

Y la pegamos al radiador. Vemos también un filtro con sus correspondiente latiguillos trenzados y un par de cables, uno del ventilador y otro de una sonda del tubo de refrigeración:

And we stick it to the radiator. We also see a filter with its corresponding braided hoses and a pair of cables, one from the fan and one from a cooling tube probe:

Image

Image

Image

Volvemos al cokpit, y vamos a simular la manta térmica que hay colocada para proteger a los pilotos. Empezamos con la parte superior que hay entre los backets, siendo el proceso similar al de las calcas de Kevlar, pero en este caso pintamos ya que hay espacio:

We return to the cokpit, and we will simulate the thermal blanket that is placed to protect the pilots. We start with the upper part between the backets, the process being similar to that of Kevlar decals, but in this case we paint since there is space:

Image

Lo pasamos a una vitola (cápsula) que traen las botellas de vino, que es un material ductil y maleable, fácil de cortar:

We pass it to a capsule brought by the wine bottles, which is a ductile and malleable material, easy to cut:

Image

Lo cortamos con el cutter y separamos la máscara:

We cut it with the cutter and separate the mask:

http://blog.maquetea.com/wp-content/upl ... -07-56.jpg

Aquí se ve la pieza superpuesta en su sitio con las costuras hechas con la parte de detrás del cutter, y con el añadido de la palanca de cambios:

Here you see the piece superimposed in place with the seams made with the back of the cutter, and with the addition of the gearshift:

Image

Hacemos lo mismo con la trasera del cockpit, dejando las partes de abajo más largas para que solape.

We do the same with the back of the cockpit, leaving the lower parts longer so that it overlaps.

Image

Aquí vemos todas las piezas:

Here we see all the pieces:

Image

Por último, he aplicado la misma calca de Kevlar a la parte delantera, eliminando la que traia el kit de origen:

Finally, I applied the same Kevlar decal to the front, eliminating the one that the original kit brought:

Image[/img]

Esto es todo por ahora, gracias por ver y comentar!!

This is all for now, thanks for watching and commenting!
Post Reply