Entex Porsche RSR 1/8, updated 12/25/2017
-
- F1 Test Driver
- Posts: 226
- Joined: Tue May 22, 2007 11:54 am
- Your Name: Giovanni
- Favorite F1 Team or Driver: Ferrari Gilles Villeneuve
- Location: Catania
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 10/14/2017
Hi at all,
I have a 1/8 scale Eidai Grip (like Entex) Porsche Rs Turbo Martini kit to build.
Can you tell me if there is an aftermarket decal sheet for this kit ?
Thank you,
regards,
Giovanni La Rosa
giovanni@fratelli-larosa.com
I have a 1/8 scale Eidai Grip (like Entex) Porsche Rs Turbo Martini kit to build.
Can you tell me if there is an aftermarket decal sheet for this kit ?
Thank you,
regards,
Giovanni La Rosa
giovanni@fratelli-larosa.com
-
- FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 10/14/2017
There are two different version available.
The original one and a Watkins Glen version.
Both are made by my buddy Michael from scalegrafixx in germany.
If you are interested i can sent you his mail address.
regards Christian
The original one and a Watkins Glen version.
Both are made by my buddy Michael from scalegrafixx in germany.
If you are interested i can sent you his mail address.
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
Topic author - F2 Champion
- Posts: 116
- Joined: Mon Jan 11, 2016 9:00 pm
- Location: Toronto, Canada
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 10/14/2017
There is also another option from a guy named Manfred. He sells a lot of aftermarket parts on german ebay made by i guess his company called M-Tec. These are actually stickers and not decals. The red sections have to be painted on the body. He can be reached at manfred-brueggemann@t-online.de
-
- F1 Test Driver
- Posts: 226
- Joined: Tue May 22, 2007 11:54 am
- Your Name: Giovanni
- Favorite F1 Team or Driver: Ferrari Gilles Villeneuve
- Location: Catania
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 10/14/2017
Hi Christian,
thank you, I am very interested by Scalegraphix decals.
Please, can you send me the e-mail address ?
Ciao,
Giovanni La Rosa
giovanni@fratelli-larosa.com
thank you, I am very interested by Scalegraphix decals.
Please, can you send me the e-mail address ?
Ciao,
Giovanni La Rosa
giovanni@fratelli-larosa.com
-
- F1 Test Driver
- Posts: 226
- Joined: Tue May 22, 2007 11:54 am
- Your Name: Giovanni
- Favorite F1 Team or Driver: Ferrari Gilles Villeneuve
- Location: Catania
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 10/14/2017
Hi Shurick,
thank you very much for your information !
I have send an e-mail to Manfred.
Regards,
Giovanni La Rosa
thank you very much for your information !
I have send an e-mail to Manfred.
Regards,
Giovanni La Rosa
-
- F2 Champion
- Posts: 100
- Joined: Thu Nov 29, 2012 7:23 pm
- Favorite F1 Team or Driver: McLaren
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 10/14/2017
Feeling less jealous waiting for this gorgeous PORSCHE in 24th scale ]-)
My F1 models https://disk.yandex.ru/d/NaTVjludIlpV1w
-
Topic author - F2 Champion
- Posts: 116
- Joined: Mon Jan 11, 2016 9:00 pm
- Location: Toronto, Canada
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 12/25/2017
Another small update..
I began working on the chassis and the body. Currently test fitting the body to the chassis and it took me a while to figure it out. Whatever people said about this kit was true. The holes in the front didnt line up, the front was way too high and the gap between the wheel and the fender was a bit large. I ended up sanding down inner part of the front body section, shortened the shocks a bit and had to use heat to bend the connecting pins so I can secure the body to the chassis. This is how she sits as of right now.. Much better than what I started with for sure.
I began working on the chassis and the body. Currently test fitting the body to the chassis and it took me a while to figure it out. Whatever people said about this kit was true. The holes in the front didnt line up, the front was way too high and the gap between the wheel and the fender was a bit large. I ended up sanding down inner part of the front body section, shortened the shocks a bit and had to use heat to bend the connecting pins so I can secure the body to the chassis. This is how she sits as of right now.. Much better than what I started with for sure.
-
- Major Constructor
- Posts: 1022
- Joined: Sat Oct 24, 2009 8:05 am
- Your Name: George
- Favorite F1 Team or Driver: Ferrari - Gilles Villeneuve
- Location: Greece
- Contact:
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 12/25/2017
Very nice work my friend. Happy holidays...
-
Topic author - F2 Champion
- Posts: 116
- Joined: Mon Jan 11, 2016 9:00 pm
- Location: Toronto, Canada
- Status: Offline
Re: Entex Porsche RSR 1/8, updated 12/25/2017
Not much progress but few recent pics..
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 256 Views
-
Last post by marlborored