WIP: McLaren builds
-
- FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
Re: WIP: McLaren builds
The paint and decal work on the MP4-30 look great!! This was a cool looking car.
Cheers,
Chris
Cheers,
Chris
-
- Backmarker
- Posts: 305
- Joined: Tue Jul 05, 2016 5:04 am
- Your Name: Tyrone
- Favorite F1 Team or Driver: James Hunt
- Location: United Kingdom
- Contact:
- Status: Offline
Re: WIP: McLaren builds
What glue do people use to stick the model parts to the toothpicks?
-
Topic author - FOTA Chairman
- Posts: 3623
- Joined: Tue Aug 23, 2005 2:42 am
- Favorite F1 Team or Driver: Senna
- Location: Toronto
- Status: Offline
Re: WIP: McLaren builds
Aug 7 - More decal work for MP4/30
Placed on rest of the decals on for MP4/30 parts. Namely wheel decals, steering wheel and rear light.
I like the approach Ebbro has offered with steering wheel decal. It is big one piece, which covers
whole face of it. I didn't need to worry about painting individual buttons and about alignment of
different items on the steering wheel. Hopefully same approach will be taken by other vendors as well.
And hopefully Ebbro will put more CF decals into their future kits of modern F1 cars. I liked included
CF decals, but there weren't that many.
Placed on rest of the decals on for MP4/30 parts. Namely wheel decals, steering wheel and rear light.
I like the approach Ebbro has offered with steering wheel decal. It is big one piece, which covers
whole face of it. I didn't need to worry about painting individual buttons and about alignment of
different items on the steering wheel. Hopefully same approach will be taken by other vendors as well.
And hopefully Ebbro will put more CF decals into their future kits of modern F1 cars. I liked included
CF decals, but there weren't that many.
Last edited by lezdep on Fri Aug 19, 2016 2:54 pm, edited 1 time in total.
Sergey's Blog - http://lezdep.blogspot.com/ | Public Gallery - http://picasaweb.google.com/lezdep
-
- FOTA Vice Chairman
- Posts: 1801
- Joined: Thu Jan 24, 2013 1:35 pm
- Your Name: Cédric
- Favorite F1 Team or Driver: RENAULT
- Location: ANTIBES
- Status: Offline
Re: WIP: McLaren builds
it is a real effect on it! what a quality you put on
-
- Team Owner
- Posts: 893
- Joined: Sat Jul 25, 2009 8:49 pm
- Your Name: Bryan Duncan
- Favorite F1 Team or Driver: All-time favorite is Senna but I don't cheer for a particular driver or team any longer. I just want to see good races with multiple teams capable of winning!
- Location: NE Florida, USA
- Status: Offline
Re: WIP: McLaren builds
How easy to apply were the wheel decals?
-
Topic author - FOTA Chairman
- Posts: 3623
- Joined: Tue Aug 23, 2005 2:42 am
- Favorite F1 Team or Driver: Senna
- Location: Toronto
- Status: Offline
Re: WIP: McLaren builds
For MP4/30, there were no difficulties at all. There are only 2 small decals per wheel.badun wrote:How easy to apply were the wheel decals?
For FW16B more time, micro-set/sol and patience were needed.
Sergey's Blog - http://lezdep.blogspot.com/ | Public Gallery - http://picasaweb.google.com/lezdep
-
Topic author - FOTA Chairman
- Posts: 3623
- Joined: Tue Aug 23, 2005 2:42 am
- Favorite F1 Team or Driver: Senna
- Location: Toronto
- Status: Offline
Re: WIP: McLaren builds
Aug 19 - Assembly started
Started assembly on my MP4/30 model last weekend. Partially put together rear and front suspensions. I am still
undecided if I will attempt to adopt RB6's brakes to this model. Plan is to do it. That's why I could not complete
suspension assemblies. Need easy access and little modifications on kit's uprights to be able to mate them
with RB6's brakes.
I also plan to install RB6's radiators inside MP4/30's body. I think they are not too far in appearance from real
car. In any case only internals of air ducts inside side pods and front faces of radiators will be visible, when
they are installed into MP4/30's body. Fit for those is quite bad, as they obviously were designed for a different
body. But I think it's feasible to adopt them. I'll see this weekend.
Started assembly on my MP4/30 model last weekend. Partially put together rear and front suspensions. I am still
undecided if I will attempt to adopt RB6's brakes to this model. Plan is to do it. That's why I could not complete
suspension assemblies. Need easy access and little modifications on kit's uprights to be able to mate them
with RB6's brakes.
I also plan to install RB6's radiators inside MP4/30's body. I think they are not too far in appearance from real
car. In any case only internals of air ducts inside side pods and front faces of radiators will be visible, when
they are installed into MP4/30's body. Fit for those is quite bad, as they obviously were designed for a different
body. But I think it's feasible to adopt them. I'll see this weekend.
Sergey's Blog - http://lezdep.blogspot.com/ | Public Gallery - http://picasaweb.google.com/lezdep
-
- Best of the Rest
- Posts: 598
- Joined: Sat Sep 12, 2015 4:11 pm
- Location: Texas
- Status: Offline
Re: WIP: McLaren builds
Gorgeous car Sergey! How were the decals to conforming around complex curves?
And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.
- Ayrton Senna
- Ayrton Senna
-
Topic author - FOTA Chairman
- Posts: 3623
- Joined: Tue Aug 23, 2005 2:42 am
- Favorite F1 Team or Driver: Senna
- Location: Toronto
- Status: Offline
Re: WIP: McLaren builds
With proper amount of micro-set and micro-sol decals eventually conformed well. Had no major dramas with them.mobiusone wrote:Gorgeous car Sergey! How were the decals to conforming around complex curves?
Last night I did go ahead and adopted RB6's brakes for this model. Cut about 2mm from the bottom of front
drums and about 1.2mm from the rears. Removed some material from rear uprights, which was preventing
drums to seat flat. I also used polycarbonate inserts from RB6 kit instead of those included in this kit. They
are taller and fit better. Next I've worked on adopting of RB6's radiators. Had to cut lower portions as they were
sticking out from inside of MP4/30's body. Even cut a bit of material from their sides toward the rear, to let
them fit better. Glued on internal radiator faces. Used PE from HobbyDesign set. Those faces will be the only
visible part of radiators when body is closed.
Just painted parts SG black. Will let them dry for couple of days. Then brush paint calipers and hubs. With
brakes ready I should be able to finish front and rear suspensions.
Sergey's Blog - http://lezdep.blogspot.com/ | Public Gallery - http://picasaweb.google.com/lezdep
-
- Team Owner
- Posts: 893
- Joined: Sat Jul 25, 2009 8:49 pm
- Your Name: Bryan Duncan
- Favorite F1 Team or Driver: All-time favorite is Senna but I don't cheer for a particular driver or team any longer. I just want to see good races with multiple teams capable of winning!
- Location: NE Florida, USA
- Status: Offline
Re: WIP: McLaren builds
The PE radiator parts look great!