Ferrari 312T4

Models in progress... including non-F1 models.
User avatar

Topic author
Anthony_RUS
Backmarker
Backmarker
Posts: 326
Joined: Sat Sep 05, 2009 9:54 am
Favorite F1 Team or Driver: Ferrari
Location: Moscow
Status: Offline
Russia

Re: Ferrari 312T4

Post by Anthony_RUS »

Some progress...

I deleted all supports from 3d-printing parts, little bit sanding those and blow first coat of primer.
Image

In parallel i work with body. At first i replaced grilles. Those were with defects and in general the geometry was wrong.
Image
Image
Image
Image
Image
If you interested in my works, you can folow me in instagram https://www.instagram.com/anthony__vinogradov

Enzojz
Formula e
Formula e
Posts: 43
Joined: Tue Aug 23, 2016 4:02 pm
Favorite F1 Team or Driver: Ferrari
Status: Offline
China

Re: Ferrari 312T4

Post by Enzojz »

Why did you separate 3d printed part for example exhaust, I think it could have been done as a whole :)

PS: for european and north american moders Shapeways get a very good printing quality while the price is relatively low.
User avatar

sky1911
Major Constructor
Major Constructor
Posts: 1049
Joined: Sun Jul 20, 2014 7:28 am
Favorite F1 Team or Driver: Jim Clark, Lotus
Status: Offline
Germany

Re: Ferrari 312T4

Post by sky1911 »

Very likely because cleanup of one big pile of exhaust snakes that are interconnected is basically not possible. There will be areas you cannot reach, no matter what. So it makes sense to print them as separate entities for easier cleanup. That and of course for ease of assembly. One solid piece is harder to fit than separate parts. But those are just my thoughts, why *I* would do it like that.
Cheers,
Roman
User avatar

Topic author
Anthony_RUS
Backmarker
Backmarker
Posts: 326
Joined: Sat Sep 05, 2009 9:54 am
Favorite F1 Team or Driver: Ferrari
Location: Moscow
Status: Offline
Russia

Re: Ferrari 312T4

Post by Anthony_RUS »

sky1911 wrote:Very likely because cleanup of one big pile of exhaust snakes that are interconnected is basically not possible. There will be areas you cannot reach, no matter what. So it makes sense to print them as separate entities for easier cleanup. That and of course for ease of assembly. One solid piece is harder to fit than separate parts. But those are just my thoughts, why *I* would do it like that.

Exactly :D

And another advantage in separate printing is that i can turn every single part in the best position for printing. And because of that, the print quality of the signle parts will be higher than the whole assembly.
If you interested in my works, you can folow me in instagram https://www.instagram.com/anthony__vinogradov
User avatar

gp-models
FOTA Chairman
FOTA Chairman
Posts: 3446
Joined: Sun Oct 07, 2012 2:17 pm
Status: Offline

Re: Ferrari 312T4

Post by gp-models »

Lovely attention to details Anthony, still looking great! :)
Take a stand!

Lloyd
F2
F2
Posts: 56
Joined: Sat Jun 10, 2017 7:04 pm
Status: Offline

Re: Ferrari 312T4

Post by Lloyd »

Those grilles improve the look of the body so much , just awesome if someone released them as a set
User avatar

zosc
Formula e
Formula e
Posts: 39
Joined: Sun Mar 07, 2010 2:56 pm
Status: Offline

Re: Ferrari 312T4

Post by zosc »

if someone released them as a set
I'm praying for this

Redbox
F2 Champion
F2 Champion
Posts: 109
Joined: Wed Jul 24, 2019 9:20 am
Favorite F1 Team or Driver: Ferrari, Lotus, Williams
Location: Italy
Status: Offline
Italy

Re: Ferrari 312T4

Post by Redbox »

Hi Anthony, great job with 3d printed parts.
I would ask you which glue are you using to bond 3D printed resin parts.
Gluing Abs or Pla is not difficult, but printed resin is more tricky.

Thank you!
User avatar

Topic author
Anthony_RUS
Backmarker
Backmarker
Posts: 326
Joined: Sat Sep 05, 2009 9:54 am
Favorite F1 Team or Driver: Ferrari
Location: Moscow
Status: Offline
Russia

Re: Ferrari 312T4

Post by Anthony_RUS »

Thanks!
Redbox wrote: I would ask you which glue are you using to bond 3D printed resin parts.
I use cyanoacrylate glue - Cosmofen CA 12
If you interested in my works, you can folow me in instagram https://www.instagram.com/anthony__vinogradov
User avatar

Topic author
Anthony_RUS
Backmarker
Backmarker
Posts: 326
Joined: Sat Sep 05, 2009 9:54 am
Favorite F1 Team or Driver: Ferrari
Location: Moscow
Status: Offline
Russia

Re: Ferrari 312T4

Post by Anthony_RUS »

Wings are painted

Image
Image
If you interested in my works, you can folow me in instagram https://www.instagram.com/anthony__vinogradov
Post Reply
  • Similar Topics
    Replies
    Views
    Last post