Yes, I see that. But the rear of the hood has two pins that drop into holes on the centre body section, below the screen on the scuttle panel. So if you have that large gap, there must be a problem with either the chassis, or the part that glues under the hood, the hinge mechanism. Something is wrong in the build up there. No way that you should have that large gap. There are examples on the Beemax website built that have no gaps. I think something has to be wrong somewhere to have that large gap like that...bossy122 wrote:Remember, the hood is mounted to the front of the chassis, not the cab.
Warning for Beemax Lancia S4
-
- FOTA Chairman
- Posts: 2271
- Joined: Sun Jul 30, 2006 4:27 pm
- Location: Barnsley, UK
- Status: Offline
Re: Warning for Beemax Lancia S4
Steve Noble
-
- F2 Champion
- Posts: 100
- Joined: Thu Nov 29, 2012 7:23 pm
- Favorite F1 Team or Driver: McLaren
- Status: Offline
Re: Warning for Beemax Lancia S4
Dry fitting is a King
My F1 models https://disk.yandex.ru/d/NaTVjludIlpV1w