F1M Forums

oops! my mistake,it's the FW19 kit being re-released, sorry.

Statistics: Posted by phicks — Fri Nov 11, 2022 5:28 am

Hobbyeasy.com will have it in stock in a couple weeks-you can pre-order now.

Statistics: Posted by phicks — Fri Nov 11, 2022 5:26 am

Flying elephants

Have you ever seen an elephant flying? Even more, have you even heard it doing so closely? Those of us who have had the opportunity to see elephants fly and listen to them up close can confirm that they are truly brutal machines.

Do the math: a Kamaz 43509 weighs just under 10 tons, each of its wheels is around 150 kilograms, they generate more than 1,000hp, they measure almost 7 meters long and more than 3 meters high... and in order to prevent them to fly to the moon and beyond they are limited to a maximum speed of 130 km/h. Even so, when one of them passes by just a few meters away, flying over the dunes, your breath just stops... trust the word of this geek!

The prestigious scale model kits brand Zvezda has taken an elephant, shrunk it to 1/35 scale, and turned it into an awesome scale model that also takes your breath away: pieces with outstanding details, including a meticulous parts listing and the whole cockpit and engine accurately reproduced. We can affirm that it's the best thing we have seen for months, and we are not the only ones who think so: the first units that arrived at SpotModel have already walked out the door without even stepping on the shelves... these elephants DO fly indeed! :-O

But don't panic, there are already a few more elephants flying towards SpotModel



Zvezda: Model truck kit 1/35 scale - Kamaz Master 43509 Kamaz Master Team sponsored by RB, VTB #509 - Andrey Karginov (RU) + Andrey Mokeev (RU) + Ivan Malkov (RU) - Dakar Rally 2022 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions


Studio27: Transkit 1/12 scale - Honda NSR500 Mister Yumcha Blue Fox Team sponsored by Mister Donut #56 - Norifumi 'Norick' Abe (JP) - Motorcycle Japanese Grand Prix 500cc 1994 - photo-etched parts, resin parts, vacuum formed parts, water slide decals, white metal parts and assembly instructions - for Tamiya reference TAM14082


Studio27: Transkit 1/12 scale - Suzuki RGB500 Heron Team sponsored by Texaco #7, 8 - Barry Sheene (GB), Tom Herron (GB) - Motorcycle World Championship 1979 - metal parts, photo-etched parts, resin parts, water slide decals, white metal parts and assembly instructions - for Tamiya references TAM14003 and TAM14009


Studio27: Transkit 1/12 scale - Suzuki RGB500 sponsored by Nava Olio Fiat #10, 11 - Graziano Rossi (IT), Virginio Ferrari (IT) - Motorcycle World Championship 1979 - metal parts, photo-etched parts, resin parts, water slide decals, white metal parts and assembly instructions - for Tamiya references TAM14003 and TAM14009


Number Five: Paint for airbrush - 190E Silver - 1 x 30ml - for Italeri reference 3624


Hasegawa: Model car kit 1/24 scale - Mini Cooper 1.3i 1997 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions


Shunko Models: Marking / livery 1/20 scale - Benetton Ford B192 Benetton Formula Ltd Team sponsored by Camel #19, 20 - Michael Schumacher (DE), Martin Brundle (GB) - Belgian Formula 1 Grand Prix, British Formula 1 Grand Prix 1992 - water slide decals, assembly instructions and tobacco sponsor decals - for Tamiya reference TAM20036


Shunko Models: Marking / livery 1/20 scale - Benetton Ford B192 Benetton Formula Ltd Team sponsored by Camel #19, 20 - Michael Schumacher (DE), Martin Brundle (GB) - Canadian Formula 1 Grand Prix, French Formula 1 Grand Prix 1992 - water slide decals, assembly instructions and tobacco sponsor decals - for Tamiya reference TAM20036


Shunko Models: Marking / livery 1/20 scale - Lotus Ford Type 78 Lotus Team sponsored by John Player Special #5, 6 - Mario Andretti (US), Gunnar Nilsson (SE) - Italian Formula 1 Grand Prix, South African Formula 1 Grand Prix, FIA Formula 1 World Championship 1977 - water slide decals, assembly instructions, painting instructions and tobacco sponsor decals - for Tamiya references TAM20004 and TAM20065


Reji Model: Marking / livery 1/24 scale - BMW M3 E30 Group A Prodrive Team sponsored by Alcatel #5 - Grégoire de Mevius (BE) + Willy Lux (BE) - 24 Hours de Ypres Rally 1990 - water slide decals and assembly instructions - for Beemax Model Kits references B24016 and BX24029


Falcon Scale Models: Chain set 1/12 scale - Suzuki GSX-RR - 3D printed parts - for Tamiya reference TAM14139


Falcon Scale Models: Chain set 1/12 scale - Kawasaki H2R / H2 Carbon - 3D printed parts - for Tamiya references TAM14131 and TAM14136 - 1 units


Falcon Scale Models: Chain set 1/12 scale - Suzuki GSX-R750 - 3D printed parts - for Hasegawa references 21507 and 21725 - 1 units


Falcon Scale Models: Chain set 1/12 scale - Ducati 900 Mike Hailwood Replica / Ducati 900 SS - 3D printed parts - for Tamiya references TAM14019 and TAM14025 - 1 + 2 units


Falcon Scale Models: Chain set 1/12 scale - Ducati Superleggera V4 - 3D printed parts - for Tamiya reference TAM14140 - 1 + 2 units


Falcon Scale Models: Clutch 1/12 scale - Ducati Superleggera V4 - 3D printed parts - for Tamiya reference TAM14140 - 1 units


Tameo Kits: Model car kit 1/43 scale - Tyrrell Ford 009 Tyrrell Racing Team #3, 4 - Didier Pironi (FR), Jean-Pierre Jarier (FR) - Brazilian Formula 1 Grand Prix 1979 - metal parts, photo-etched parts, rubber parts, vacuum formed parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions


ScaleLab 24: Rims 1/24 scale - BBS 15 inches - 3D printed parts and photo-etched parts - for Beemax Model Kits references B24015, 105108 and aos10510 - 4 units


ScaleLab 24: Detail up set 1/24 scale - Sauber Mercedes C9 - 3D printed parts, photo-etched parts, seatbelt fabric, turned metal parts, other materials and assembly instructions - for Tamiya references TAM24091, TAM24310 and TAM24359


ScaleLab 24: Detail up set 1/24 scale - Audi R8 LMS Evo - 3D printed parts, paint masks, photo-etched parts, resin parts, seatbelt fabric, turned metal parts and assembly instructions - for Nunu references PN24026 and NU24026


ScaleLab 24: Detail up set 1/24 scale - Sauber Mercedes C9 - photo-etched parts, seatbelt fabric and assembly instructions - for Tamiya references TAM24091, TAM24310 and TAM24359


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Sprue K - plastic parts - for Beemax Model Kits reference BX24026, or Nunu reference PN24009


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Sprue W - plastic parts - for Beemax Model Kits reference BX24026


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Sprue F and G - plastic parts - for Beemax Model Kits reference BX24026


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Sprue I - plastic parts - for Beemax Model Kits reference BX24026


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Tyres - rubber parts - for Beemax Model Kits reference BX24026, or Nunu reference PN24009


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Body - plastic parts - for Beemax Model Kits reference BX24026, or Nunu reference PN24009


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Sprue A - plastic parts - for Beemax Model Kits reference BX24026, or Nunu reference PN24009


Beemax Model Kits: Spare part 1/24 scale - Peugeot 306 Maxi Evo 2: Sprue B and C - plastic parts - for Beemax Model Kits reference BX24026, or Nunu reference PN24009


RC Books: Book - Lancia Stratos Group 5 - Turbo - Silhouette - Standard edition


Studio27: Model car kit 1/20 scale - Williams Renault FW19 Rothmans Williams Renault Team sponsored by Hype #3, 4 - Jacques Villeneuve (CA), Heinz-Harald Frentzen (DE) - FIA Formula 1 World Championship 1997 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions


Scale Production: Seat 1/24 scale - Seats Classic type 2 - 2 units


Ukrainian Scale Cars Production: Seat 1/24 scale - Sparco R600 sportseats - resin parts - 2 units


Studio27: Tyre set 1/24 scale - Slick tyres - rubber parts - 4 units


Hasegawa: Model car kit 1/24 scale - Toyota 91 C-V Tom's Team sponsored by Minolta #36 - Masanori Sekiya (JP) + Hitoshi Ogawa (JP) + Andy Wallace (GB) - Japan Sport Prototype Endurance Championship (JSPC) 1991 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions


Hasegawa: Model car kit 1/24 scale - Subaru Impreza WRC 2005 Atolye Kazaz Team sponsored by Red Devil #27 - Kristian Sohlberg (FI) + Tomi Tuominen (FI) - Rally de Italia Sardegna 2006 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions


Hasegawa: Model car kit 1/24 scale - Jaguar XJR-8 Silk Cut Jaguar Team #6 - Martin Brundle (GB) + John Nielsen (DK) - FIA World Sports-Prototype Championship (WSPC) 1987 - plastic parts, resin parts, rubber parts, water slide decals, assembly instructions and painting instructions


Hasegawa: Model car kit 1/24 scale - Mazda Savanna RX-7 SA22C Mazda Technical Center Team #7 - Yoshimi Katayama (JP) + Yojiro Terada (JP) + Takashi Yorino (JP) - 24 Hours of Daytona 1979 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions


Decalcas: Nuts - Castle nut with split pin 0,55mm, 0,7mm, 0,8mm, 0,9mm, 1,0mm - 3D printed parts - 100 + 100 + 100 + 100 + 100 units


Copyright © SpotModel

Statistics: Posted by spotmodel — Fri Nov 11, 2022 4:32 am

If anyone has either of the kits below that they would be willing to part with please get in touch. - I would be interested!

Studio27 Williams FW18 World Champion 1996 ST27-FK20181
Hobby Base Custom Williams FW18 F1 1996 Champion machine
Thanks
Tim

Statistics: Posted by TimLucas — Fri Nov 11, 2022 3:53 am

Zero Paints has some : https://www.hiroboy.com/search?q=F1-75

Statistics: Posted by racingkars — Fri Nov 11, 2022 12:50 am

What is the correct paint for the 2022 F1-75?

Thanks.

Statistics: Posted by fgf0417 — Thu Nov 10, 2022 10:48 pm

Oh my…….great deal……too bad CDN sucks now.

Statistics: Posted by tifosi224 — Thu Nov 10, 2022 10:16 pm

For sale MFH 1/12th 250LM.
Complete kit sealed bags.
$550.00 plus shipping from USA.
Pay Pal friends & family.
email: daves1754@gmail.com
IMG_0904.jpgIMG_0903.jpgIMG_0902.jpgUnknown.jpeg

Statistics: Posted by daves — Thu Nov 10, 2022 10:04 pm

As Groucho Marx once famously said: "I wouldn't belong to any club that would have me as a member"

Statistics: Posted by tubegenius — Thu Nov 10, 2022 4:14 pm

Ípsilon!! Otro español
No te arrepentirás ni aburrirás! bienvenido
Yes, and IPMS sometimes are associated with Tamiya as sponsors.
I’d say that any local club from Spain would be a Yes to Eric’s question¡Encantado JamesB! Soy nuevo en el foro y en hobby.

Statistics: Posted by ipsilonx2 — Thu Nov 10, 2022 3:14 pm

Thanks Stu! always there
I finally found a solution with Macrium. So Veeam Free will be next time
Macrium did work really well and it seems to have several interesting tools. I seriously recommend it.
Now I´ll have to remove the other three softwares I downloaded.
Ah... about the old office version, I´ll try tomorrow, thanks. I think it was 2010 (if that makes any sense at all) but now I am overjoyed and overproud with my achievement after all day!
BTW yes the PC feels faster with the SSD. I´ll fiddle a bit tomorrow to see if I can assign some SSD space to make some kinf of virtual memoryy supplementing RAM... or kinda.
Ah! I did not have an old disc to keep since it was a brand new PC with just Win on it...

Statistics: Posted by JamesB — Thu Nov 10, 2022 1:54 pm

Received some more pictures of the finished model.

The link to the pictures don't seem to work I'm afraid

Statistics: Posted by TvD — Thu Nov 10, 2022 1:12 pm

You'll need to revert back to the old hard drive, but I've used Veeam Free for this. Boot up to the old hard drive, take a backup using Veeam onto an external hard drive, make a recovery image, then shut down the PC, connect up the SSD, boot off of the recovery image and you can copy it to the SSD. Its free for this.

For Office, if it was downlaoded from the MS site, you should still be able to access it. Which version was it?

Statistics: Posted by stubeck — Thu Nov 10, 2022 1:01 pm

Thanks Stu.But somehow every software I try has one shortcoming or another. So nothing till now,either Aomei, clonezilla or Acronis. So if someone is in "been there, done that" mode recently, please guys tell me. I spent too many hours to no avail.
About Office I do have a freeware version,but wouldlike to have again the original. And no I don´t have it as it was downloaded from MS site THx!

Statistics: Posted by JamesB — Thu Nov 10, 2022 12:27 pm

Received some more pictures of the finished model.

Statistics: Posted by steinietrabi — Thu Nov 10, 2022 11:17 am

Hello everyone
I'm just about to start my next build and I couldn't find any good detailed pics of the Williams FW24 through my normal sources. Anyone have any they wouldn't mind sharing with me or point me in the right direction?
Thanks,
Donovan

Statistics: Posted by Bonanza — Thu Nov 10, 2022 10:59 am

Acronis should work if you only need it for a month, you won't need to be doing this again in the near future right? Depending on what you are trying to bring over though, it may just be easier to reinstall the software and manually copy your files over.

Regarding Office, you'll need to find your old version and install that. Saying that, the free online versions of them (or other versions from Google) work for most people if you aren't looking to pay for it. If you have a Hotmail/Outlook account or a Gmail one, you can upload files to their online area and access them online that way.

Statistics: Posted by stubeck — Thu Nov 10, 2022 8:57 am

Congratulations ! very nice built

Statistics: Posted by Shiiya — Thu Nov 10, 2022 4:34 am

Congratulations ! very nice job , clean and beautiful it is one of my fauvorite F1´s car

Statistics: Posted by Shiiya — Thu Nov 10, 2022 4:31 am

It's an excellent build, and a great suspension solution, that made me remember something that I should have talked about in this forum a long time ago: I have designed a simple tool to connect the FW11 front suspension arms, based on a 3D scan of the model. I have uploaded it to my Shapeways shop if someone is still interested in it. I'm sorry, I had so much to do lately that I forgot that I made this... and also a similar solution for the B188. I could have spared a lot of work for you guys...

https://www.shapeways.com/product/7NZHH ... 9&li=shops

https://www.shapeways.com/product/UHZXZ ... 0&li=shopsVery cool that you have this available. Wish I had known

Statistics: Posted by Bonanza — Wed Nov 09, 2022 8:46 pm