F1M Forums

For Sale • Re: FS: 1/20 and 1/24 for sale - updated Nov 23, 2022

F1M Forums - Sat, 11/26/2022 - 07:29
pm sent for Type 79 kit

Statistics: Posted by Belugawrx — Sat Nov 26, 2022 7:29 am

Categories: F1M Forums

Questions • Re: Painting order - 1/12 CSL

F1M Forums - Sat, 11/26/2022 - 07:19
Um, since I haven't painted anything (like this yet) - why do you layer the colours on top of each other? I would have thought to prime the car with whatever, then shoot it all white, then mask of anything that is not yellow, shoot the yellow, do the same with red, then blue. It will likely be a pain in the youknowhere to get the masking spot on (nothing like trying to replicate a lozenge camo pattern of a 1/32 ww1 bird) but you wouldn't have "excessive" buildup of paint plus there should only be minimal ridges between the various colour sections. What am I missing here?
I mean, I can see why spraying on top of each other would make sense as you don't have to be super exact with the masking, whereas you could end up with gaps between two colours where the base white will show through because you didn't match the mask properly to the previous layer(s). And I would suggest performing a few trials beforehand to dial in the overlap or whatever necessary to get smooth gaps (or rather no gaps!). Sure - this might be easier in 1/12 than in 1/20 but that way you won't have to worry too much about doors not closing anymore and other panel gaps being too small or non-existent - unless you lay your paint on really thick.

Again, this is my thinking and theoretical approach without having done it previously myself.

Statistics: Posted by sky1911 — Sat Nov 26, 2022 7:19 am

Categories: F1M Forums

Completed Projects • Re: Lotus 99T, Tamiya 1/20

F1M Forums - Sat, 11/26/2022 - 00:10
Super nice, congrats!

Statistics: Posted by Jeff — Sat Nov 26, 2022 12:10 am

Categories: F1M Forums

Tips and Hints • Re: 2022 Ferrari F1-75

F1M Forums - Fri, 11/25/2022 - 21:12
Awesome carbon decal work Thomas, You are a machine!!!Not that there is any misunderstanding, but the pictures of the finished F1-75 are not mine.

Well now my face is Ferrari Red......

Statistics: Posted by waxdart — Fri Nov 25, 2022 9:12 pm

Categories: F1M Forums

Questions • Re: Painting order - 1/12 CSL

F1M Forums - Fri, 11/25/2022 - 20:40
I too have had this project going for years, though in 1/24.
I used a base of Tamiya white primer. Then painted 3 Tamiya LC lacquers in order: yellow, red, then blue. I put a light dusting of primer between the red and blue coats to make sure the red didn't bleed through. I didn't thin the paint enough (first time working with LP paints) and got some really bad textures, but after some clear coat and polishing it looks presentable.

I agree with everyone on testing the colors on spoons on top of each other. Would've saved me a great deal of trouble!



Statistics: Posted by whatisdeletrazdoing — Fri Nov 25, 2022 8:40 pm

Categories: F1M Forums

Wanted • Re: LF/ WANTED Fujimi Ferrari F150

F1M Forums - Fri, 11/25/2022 - 15:17
Thanks how I did not think our good friend would have it!

Statistics: Posted by JamesB — Fri Nov 25, 2022 3:17 pm

Categories: F1M Forums

Wanted • Re: LF/ WANTED Fujimi Ferrari F150

F1M Forums - Fri, 11/25/2022 - 14:29
https://www.dominomodel.com/nl/p/16608/ ... -japan-gp/

They also have the s27 carbon and etch set in stock!

Statistics: Posted by Ronnux — Fri Nov 25, 2022 2:29 pm

Categories: F1M Forums

Wanted • LF/ WANTED Fujimi Ferrari F150

F1M Forums - Fri, 11/25/2022 - 11:26
That´s it. Preferably cheap and from Europe!!
Started would do, too.
Best regards
James

Statistics: Posted by JamesB — Fri Nov 25, 2022 11:26 am

Categories: F1M Forums

Questions • Re: Painting order - 1/12 CSL

F1M Forums - Fri, 11/25/2022 - 08:36
When using the same supllier and the same type of paint there should not be a problem. Problems only can appear when mixing Laquer and acrylic for example, but this can be fixed by using the same type of thinner, means the acrylics should be thinned with lacquer thinner too.

Statistics: Posted by gp-models — Fri Nov 25, 2022 8:36 am

Categories: F1M Forums

Completed Projects • Re: Lotus 99T, Tamiya 1/20

F1M Forums - Fri, 11/25/2022 - 08:30
Nice and clean build, would like to see the engine bay too.

Statistics: Posted by gp-models — Fri Nov 25, 2022 8:30 am

Categories: F1M Forums

Work in Progress • Re: Lancia "Deltona" Repsol 1993 - Hasegawa 1/24

F1M Forums - Fri, 11/25/2022 - 08:11
Seems ok in Win11 with Firefox.

Statistics: Posted by vekkuli — Fri Nov 25, 2022 8:11 am

Categories: F1M Forums

Work in Progress • Re: Lancia "Deltona" Repsol 1993 - Hasegawa 1/24

F1M Forums - Fri, 11/25/2022 - 04:57
I also have the same issue with Jesus' posts.
I am no IT person by a long stretch, but I find that if you right click on the 'image' icon, then 'open in new tab', the pic will then load up.
You need to do that for each image. Simple solution that works for me.
Anyway, try that Malc and see if that works.No, as mentioned the picture hyperlinks are not 'live' so there is nothing to click on.
Its probably somthing to do with the SSL certificate from the original blog the pictures are hosted on.

Malc.

Statistics: Posted by Chinamalc — Fri Nov 25, 2022 4:57 am

Categories: F1M Forums

Product Announcements • Re: SpotModel -> Newsletters 2015

F1M Forums - Fri, 11/25/2022 - 04:22




Cyber Monday... and 95

One of the most anticipated moments of the e-commerce year has arrived: the CyberMonday. Yaaaayyyyy! And at SpotModel we have decided to celebrate it with you, selling 95 products on our website at a very attractive price (ending in "and 95 cents") for a limited time: just 95 hours.

So since right now until next Monday take advantage of this offer and have a look at www.spotmodel.com, surely you will find more than one whim to endulge yourself or that gift that will make you look like a king... or queen

You know, keep the engine running and stay tuned so SpotModel's CyberMonday doesn't slip away.



Studio27: Marking / livery 1/20 scale - Jordan Ford J191 Jordan Grand Prix Team sponsored by 7UP Fujifilm #32, 33 - Andrea de Cesaris (IT), Michael Schumacher (DE) - FIA Formula 1 World Championship 1991 - water slide decals and assembly instructions - for Tamiya reference TAM20032


Renaissance Models: Marking / livery 1/24 scale - Mitsubishi Lancer Evolution IV Mitsubishi RalliArt Team #1, 2 - Tommi Mäkinen (FI) + Seppo Harjanne (FI), Tommi Mäkinen (FI) + Risto Mannisenmäki (FI), Richard Burns (GB) + Robert Reid (GB) - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1997 and 1998 - water slide decals, assembly instructions and painting instructions - for Hasegawa references 20310, 25072 and CR-112


Falcon Scale Models: Clutch 1/12 scale - Suzuki GSX-RR - 3D printed parts - for Tamiya reference TAM14139 - 1 units


Falcon Scale Models: Chain set 1/12 scale - Yamaha YZF-R1M - 3D printed parts - for Tamiya references TAM14133, HC-14133 and TMY14133 - 1 units


Falcon Scale Models: Rivets 1/12 scale - Cowling screws - 3D printed parts - 49 + 49 units


Falcon Scale Models: Chain set 1/12 scale - Honda CBR1000RR-R Fireblade SP - 3D printed parts - for Tamiya reference TAM14138 - 1 units


Falcon Scale Models: Chain set 1/12 scale - Honda RC213V - 3D printed parts - for Tamiya reference TAM14130


Yamamoto Model Parts: Detail 1/24 scale - CB Radio Set - 3D printed parts and other materials


Yamamoto Model Parts: Detail 1/24 scale - Set of sports shock absorbers - 3D printed parts and other materials


Yamamoto Model Parts: Detail 1/24 scale - Distributors for 8 cylinder engines - 3D printed parts and other materials - 4 units


Yamamoto Model Parts: Detail 1/24 scale - Distributors for 6 cylinder engines - 3D printed parts and other materials - 4 units


Yamamoto Model Parts: Detail 1/24 scale - Distributors for 4 cylinder engines - 3D printed parts and other materials - 4 units


Yamamoto Model Parts: Detail 1/24 scale - Set of fluid tanks - 3D printed parts - 6 units


Yamamoto Model Parts: Detail 1/24 scale - Strut bar set - 3D printed parts and plastic parts - 3 units


Yamamoto Model Parts: Detail 1/24 scale - Winch set - 3D printed parts


Yamamoto Model Parts: Fire extinguisher 1/24 scale - Fire system with metallic base - 3D printed parts and photo-etched parts - 1 units


Yamamoto Model Parts: Detail 1/24 scale - Sport car battery - 3D printed parts - 1 units


Yamamoto Model Parts: Detail 1/24 scale - Hydraulic handbrake type 1 - 3D printed parts - 1 units


Yamamoto Model Parts: Detail 1/24 scale - Sport air filter set - 3D printed parts - 4 units


Yamamoto Model Parts: Detail 1/24 scale - Oil cooler big - 3D printed parts - 1 units


Yamamoto Model Parts: Detail 1/24 scale - Brake pump and coolant reservoir - 3D printed parts - 2 units


Yamamoto Model Parts: Detail 1/24 scale - Adapters for Aoshima rims to Tamiya/Beemax - 3D printed parts - 4 units


Yamamoto Model Parts: Detail 1/24 scale - Adapters for StreetBlisters rims to Tamiya/Beemax - 3D printed parts - 8 units


Yamamoto Model Parts: Detail 1/24 scale - Car Audio set - 3D printed parts - 10 units


Yamamoto Model Parts: Wing set 1/24 scale - GT rear spoiler type 1 - 3D printed parts - 1 units


Yamamoto Model Parts: Wing set 1/24 scale - GT rear spoiler type 2 - 3D printed parts - 1 units


Yamamoto Model Parts: Detail 1/24 scale - Tow hook set - 3D printed parts - 12 units


Yamamoto Model Parts: Detail 1/24 scale - Turbo GT30S - 3D printed parts - 2 units


Yamamoto Model Parts: Detail 1/24 scale - Intercooler type D - 3D printed parts - 1 units


Yamamoto Model Parts: Lamp pod 1/24 scale - LED Light bar Set - 3D printed parts - 5 units


Yamamoto Model Parts: Detail 1/24 scale - Containers for oils and workshop chemicals - 3D printed parts - 6 units


Yamamoto Model Parts: Detail 1/24 scale - Storage boxes - 3D printed parts - 2 units


Yamamoto Model Parts: Rims 1/24 scale - Work Equip 01 15 inches - 3D printed parts and water slide decals - 4 units


Yamamoto Model Parts: Rims 1/24 scale - Enkei NT03+M 18 inches - 3D printed parts and water slide decals - 4 units


Yamamoto Model Parts: Rims 1/24 scale - Wide Steelies 16 inches - 3D printed parts - 4 units


Yamamoto Model Parts: Rims 1/24 scale - Ferrada FR4 19 inches - 3D printed parts and water slide decals - 4 units


Copyright © SpotModel

Statistics: Posted by spotmodel — Fri Nov 25, 2022 4:22 am

Categories: F1M Forums

News • Re: MULTIMEDIA Upcoming F1 Releases 2023

F1M Forums - Fri, 11/25/2022 - 01:21
20F22N111Rd18 NewScratch 1/20 Red Bull RB18
Release date January 2023Where is the best place to pre-order ? Preferably with discount.Best is to order it from the manufacturer itself.
Best price and low shipment costs + plus best conditions for replacement parts if needed.

Statistics: Posted by steinietrabi — Fri Nov 25, 2022 1:21 am

Categories: F1M Forums

News • Re: MULTIMEDIA Upcoming F1 Releases 2023

F1M Forums - Thu, 11/24/2022 - 19:16
20F22N111Rd18 NewScratch 1/20 Red Bull RB18
Release date January 2023Where is the best place to pre-order ? Preferably with discount.

Statistics: Posted by lezdep — Thu Nov 24, 2022 7:16 pm

Categories: F1M Forums

Work in Progress • Re: Lancia "Deltona" Repsol 1993 - Hasegawa 1/24

F1M Forums - Thu, 11/24/2022 - 17:49
I also have the same issue with Jesus' posts.
I am no IT person by a long stretch, but I find that if you right click on the 'image' icon, then 'open in new tab', the pic will then load up.
You need to do that for each image. Simple solution that works for me.
Anyway, try that Malc and see if that works.

Jesus, once again another master class in model making. I can really appreciate the craftsmanship you demonstrate in all of your models.
Look forward to seeing this one completed! Cheers. TimThanks a lot Tim for your comments!! Very hapey you like it but i'm afraid, it will take more time than expected because i have many things to do!!!

Statistics: Posted by JesusM — Thu Nov 24, 2022 5:49 pm

Categories: F1M Forums

Work in Progress • Re: Lancia "Deltona" Repsol 1993 - Hasegawa 1/24

F1M Forums - Thu, 11/24/2022 - 15:23
I also have the same issue with Jesus' posts.
I am no IT person by a long stretch, but I find that if you right click on the 'image' icon, then 'open in new tab', the pic will then load up.
You need to do that for each image. Simple solution that works for me.
Anyway, try that Malc and see if that works.

Jesus, once again another master class in model making. I can really appreciate the craftsmanship you demonstrate in all of your models.
Look forward to seeing this one completed! Cheers. Tim

Statistics: Posted by fastbackfreddie — Thu Nov 24, 2022 3:23 pm

Categories: F1M Forums

Questions • Re: Painting order - 1/12 CSL

F1M Forums - Thu, 11/24/2022 - 14:27
The only thing I would add is to test those different paints out on top of one another on a plastic spoon to see if they have any reactions to one another. You don't want to get to the final color and then have the project go sideways.

Statistics: Posted by bossy122 — Thu Nov 24, 2022 2:27 pm

Categories: F1M Forums

Questions • Re: Painting order - 1/12 CSL

F1M Forums - Thu, 11/24/2022 - 12:34
I will do as you say. How amazing to find someone attempting the same project in California as I am in little old England!

Thank you both.

I as just thinking that if I got any white or yellow on the red or blue, it would be easier to tidy up - but I like the idea of starting with a semi gloss white which should act as a good key for the colours on top.

Here we go….

Statistics: Posted by Hugeprong — Thu Nov 24, 2022 12:34 pm

Categories: F1M Forums

Work in Progress • Re: Lancia "Deltona" Repsol 1993 - Hasegawa 1/24

F1M Forums - Thu, 11/24/2022 - 08:47
It’s probably you Malcolm though it might also depend on the location as I am also in Sain as Jesus

Statistics: Posted by JamesB — Thu Nov 24, 2022 8:47 am

Categories: F1M Forums