Page 1 of 42

1/12 Matra MS11

Posted: Sun Aug 02, 2015 10:17 am
by mvc
Next up: the Tamiya 1/12 Matra MS11!

Great kit, but it's from the late sixties so we cannot expect the same level of detail and crispness we have gotten used to from Tamiya's later models. My first impression is that the engine (and everything around it) actually looks very nice, tires are very good, surface detail is ok.

The main problem with the kit, as for as I'm concerned, is the interior: all the driver's legroom is taken by a battery compartment from the days that Tamiya also made motorized versions of her kits. So there are no pedals (and no master cylinders) and the main structure just isn't right.

So my main challenge is to fix that: race cars need pedals :wink: I will also try to improve the simplified gearstick assembly. For me this is all very exciting because I have never done anything like this before :? so let's see how it all ends...
20150801_matra_1789.jpg
20150801_matra_1790.jpg
20150801_matra_1791.jpg

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 10:32 am
by mvc
So first thing to do, the fun part: removing everything that's in the way :)
Cut away the battery compartment..
Cut away the battery compartment..
The battery cover will work as a floor
The battery cover will work as a floor
The front bulkhead will need modifying, the opening should be much larger. I also cut away the gear stick assembly. Actually I will not use the whole seat part at all.
The front bulkhead will need modifying, the opening should be much larger. I also cut away the gear stick assembly. Actually I will not use the whole seat part at all.

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 10:44 am
by mvc
Decided to redo the interior structure. Started with creating a support structure from plastic card. The brass rods give some support while cutting and sanding everything to size.
20150801_matra_1805.jpg
20150801_matra_1806.jpg
20150801_matra_1807.jpg
20150801_matra_1808.jpg
20150801_matra_1810.jpg
20150801_matra_1812.jpg
20150801_matra_1813.jpg

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 10:55 am
by mvc
Test fitting some of the new surfaces... nothing glued yet, just tape. Need to check if there is enough space left for the front dampers :oops:

That's all for today!
20150801_matra_6761.jpg
20150801_matra_6762.jpg
20150801_matra_6763.jpg
20150801_matra_6764.jpg
20150801_matra_6765.jpg
20150801_matra_6766.jpg

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 12:55 pm
by harveyb258
You're off to a great start on this!
I will be following this one, closely :wink:

Cheers, H

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 12:58 pm
by vekkuli
Good Start, keep 'Em comin' :) .

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 3:12 pm
by generationx
Great work - enjoying this one!

Re: 1/12 Matra MS11

Posted: Sun Aug 02, 2015 4:38 pm
by vanhookvintage
Wow! Just another example of the mind-boggling work that shows up on this forum! Will be watching for more! :D :D :D

Cheers,
Greg

Re: 1/12 Matra MS11

Posted: Mon Aug 03, 2015 1:25 am
by Belugawrx
cool sfsgood
following
cheers

Re: 1/12 Matra MS11

Posted: Mon Aug 03, 2015 3:33 am
by Schumi
Very nice start!
I like all the scratch work, thanks for sharing :D

Cheers, Martijn